Code of Federal Regulations Title 46. Shipping § 46.162.050–19 Oil content meter and bilge alarm test rig
Current as of October 02, 2022 | Updated by FindLaw Staff
(a) This section contains requirements for test rigs used in approval testing of oil content meters and meter. A typical test rig is described in Figure 162.050–19. The mixture pipe shown in Figure 162.050–19 is the portion of test rig piping between the oil injection point and the meter or bilge alarm piping.
(b) Each sample point on a test rig must be of the type described in Figure 162.050–17(e) and must be in a vertical portion of the test rig piping.
(c) Each test rig must have a centrifugal pump that is designed to operate at 1,000 revolutions per minute or more.
(d) The mixture pipe on a test rig must have a uniform inside diameter.
FIGURE 162.050–19—MONITOR AND BILGE ALARM TEST RIG
Cite this article: FindLaw.com - Code of Federal Regulations Title 46. Shipping § 46.162.050–19 Oil content meter and bilge alarm test rig - last updated October 02, 2022 | https://codes.findlaw.com/cfr/title-46-shipping/cfr-sect-46-162-050-19/
FindLaw Codes may not reflect the most recent version of the law in your jurisdiction. Please verify the status of the code you are researching with the state legislature or via Westlaw before relying on it for your legal needs.
For Legal Professionals
Learn About the Law
Get help with your legal needs
FindLaw’s Learn About the Law features thousands of informational articles to help you understand your options. And if you’re ready to hire an attorney, find one in your area who can help.
Need to find an attorney?
Search our directory by legal issue
Enter information in one or both fields (Required)