(a) Except as provided in paragraph (b) of this section, for any coil coating line for
which you use an add-on control device, unless you use a solvent recovery system and
conduct a liquid-liquid material balance according to § 63.5170(e)(1), you must meet the applicable operating limits specified in Table 1 to this subpart. You must establish the operating limits during performance tests according to the requirements in § 63.5160(d)(3) and Table 1 to § 63.5160. You must meet the operating limits established during the most recent performance test required in § 63.5160at all times after you establish them.
(b) If you use an add-on control device other than those listed in Table 1 to this subpart,
or wish to monitor an alternative parameter and comply with a different operating
limit, you must apply to the Administrator for approval of alternative monitoring
under § 63.8(f).
FindLaw Codes may not reflect the most recent version of the law in your jurisdiction. Please verify the status of the code you are researching with the state legislature or via Westlaw before relying on it for your legal needs.
Was this helpful?
Response sent, thank you
Welcome to FindLaw's Cases & Codes
A free source of state and federal court opinions, state laws, and the United States Code. For more information about the legal concepts addressed by these cases and statutes, visit FindLaw's Learn About the Law.