Current as of January 01, 2018 | Updated by FindLaw Staff
Welcome to FindLaw's Cases & Codes, a free source of state and federal court opinions, state laws, and the United States Code. For more information about the legal concepts addressed by these cases and statutes, visit FindLaw's Learn About the Law.
(1) The designers' section of the examining board may limit, suspend, or revoke a permit or reprimand the permittee if the permittee is guilty of any of the following:
(a) Fraud or deceit in obtaining the permit.
(b) Gross negligence, incompetency, or misconduct in practice.
(c) Signing documents not prepared by the permittee or under the permittee's control.
(d) Knowingly aiding or abetting unauthorized designing of engineering systems as stated in s. 443.07(3) by persons not granted permits under this chapter.
(e) Conviction of a felony, subject to ss. 111.321, 111.322, and 111.335, or adjudication of mental incompetency by a court of competent jurisdiction.
(2) If, after a hearing conducted under the rules promulgated under s. 440.03(1) before the designers' section of the examining board, two-thirds of the members of the section vote in favor of sustaining the charges, the designers' section of the examining board shall reprimand the permittee or limit, suspend, or revoke the permit. The action of the designers' section of the examining board under this section is subject to review under ch. 227.
Cite this article: FindLaw.com - Wisconsin Statutes Regulation and Licensing (Ch. 440 to 480) § 443.13. Disciplinary proceedings against designers of engineering systems - last updated January 01, 2018 | https://codes.findlaw.com/wi/regulation-and-licensing-ch-440-to-480/wi-st-443-13/
FindLaw Codes may not reflect the most recent version of the law in your jurisdiction. Please verify the status of the code you are researching with the state legislature or via Westlaw before relying on it for your legal needs.