Skip to main content
Find a Lawyer

Virginia Code Title 45.2. Mines, Minerals, and Energy § 45.2-920. Shop and other equipment

Current as of January 01, 2025 | Updated by Findlaw Staff

A. The following shall be guarded and maintained adequately:

1. Gears, sprockets, pulleys, fan blades or propellers, friction devices, and couplings with protruding bolts or nuts.

2. Shafting and projecting shaft ends that are within seven feet of the floor or the platform level.

3. Belt, chain, or rope drives that are within seven feet of the floor or the platform.

4. Fly wheels. Any fly wheel that extends more than seven feet above the floor shall be guarded to a height of at least seven feet.

5. Circular and band saws and planers.

6. Repair pits. Guards shall be kept in place when a pit is not in use.

7. Counterweights.

8. Mine fans. The approach to any mine fan shall be guarded.

9. Lighting and other electrical equipment that could create a shock hazard or cause personal injury.

B. No machinery shall be repaired or oiled while in motion unless a safe remote oiling device is used.

C. A guard or safety device that is removed from any machine shall be replaced before the machine is put in operation.

D. Every mechanically operated grinding wheel shall be equipped with:

1. Safety washers and tool rests;

2. A substantial retaining hood, the hood opening of which shall not expose more than a 90-degree sector of the wheel. Each such hood shall include a device to control and collect excess rock, metal, or dust particles. If no such device is provided, equivalent protection shall be provided to each employee operating such machinery; and

3. Eyeshields, unless goggles are worn by the operator.

E. The operator or his agent shall develop proper procedures for examining for potential hazards, completing maintenance, and operating each type of centrifugal pump. The procedures shall, at a minimum, address the manufacturers' recommendations for start-up and shutdown of each type of pump, the proper actions to be taken when a pump is suspected of overheating, the safe location of start and stop switches, and the actions to be taken when signs of structural metal fatigue, such as cracks in the frame, damaged cover mounting brackets, or missing bolts or other components, are detected. Every miner who repairs, maintains, or operates any such pump shall be trained in these procedures.

Previous Part of Code Next Part of Code
Back to Chapter List

Cite this article: FindLaw.com - Virginia Code Title 45.2. Mines, Minerals, and Energy § 45.2-920. Shop and other equipment - last updated January 01, 2025 | https://codes.findlaw.com/va/title-45-2-mines-minerals-and-energy/va-code-sect-45-2-920/

FindLaw Codes may not reflect the most recent version of the law in your jurisdiction. Please verify the status of the code you are researching with the state legislature before relying on it for your legal needs.

Was this helpful?

Welcome to FindLaw's Cases & Codes

A free source of state and federal court opinions, state laws, and the United States Code. For more information about the legal concepts addressed by these cases and statutes, visit FindLaw’s Learn About the Law.

Go to Learn About the Law

Latest Blog Posts

For Legal Professionals

Learn About The Law

Get help with your legal needs

FindLaw’s Learn About the Law features thousands of informational articles to help you understand your options. And if you’re ready to hire an attorney, find one in your area who can help.

Go to Learn About the Law

Need to Find an Attorney?

Search our directory by legal issue

Enter information in one or both fields (Required)

Copied to clipboard