Welcome to FindLaw's Cases & Codes, a free source of state and federal court opinions, state laws, and the United States Code. For more information about the legal concepts addressed by these cases and statutes, visit FindLaw's Learn About the Law.
(1) A person riding a bicycle or moped and intending to turn left shall comply with Section 41-6a-801 or Subsection (2).
(2)(a) A person riding a bicycle or moped intending to turn left shall approach the turn as close as practicable to the right curb or edge of the roadway.
(b) After proceeding across the intersecting roadway, to the far corner of the curb or intersection of the roadway edges, the bicyclist or moped operator shall stop, as far out of the way of traffic as practical.
(c) After stopping, the bicyclist or moped operator shall yield to any traffic proceeding in either direction along the roadway he had been using.
(d) After yielding and complying with any traffic-control device or peace officer regulating traffic, the bicyclist or moped operator may proceed in the new direction.
(3)(a) Notwithstanding Subsections (1) and (2), a highway authority in its respective jurisdiction may place traffic-control devices that require and direct turning bicyclists and moped operators to travel a specific course.
(b) When the devices are placed under Subsection (3)(a), a person may not turn a bicycle other than as directed by the devices.
Cite this article: FindLaw.com - Utah Code Title 41. Motor Vehicles § 41-6a-1108. Bicycles and mopeds--Turns--Designated lanes - last updated May 05, 2022 | https://codes.findlaw.com/ut/title-41-motor-vehicles/ut-code-sect-41-6a-1108/
FindLaw Codes may not reflect the most recent version of the law in your jurisdiction. Please verify the status of the code you are researching with the state legislature or via Westlaw before relying on it for your legal needs.