Learn About The Law
Get help with your legal needs
FindLaw’s Learn About the Law features thousands of informational articles to help you understand your options. And if you’re ready to hire an attorney, find one in your area who can help.
Current as of January 01, 2023 | Updated by Findlaw Staff
Before issuing a permit for a new facility designed to dispose of or treat hazardous waste or PCB, the Environmental Quality Commission must find, on the basis of information submitted by the applicant, the Department of Environmental Quality or any other interested party, that the proposed facility meets the following criteria:
(1) The proposed facility location:
(a) Is suitable for the type and amount of hazardous waste or PCB intended for treatment or disposal at the facility;
(b) Provides the maximum protection possible to the public health and safety and environment of Oregon from release of the hazardous waste or PCB stored, treated or disposed of at the facility; and
(c) Is situated sufficient distance from urban growth boundaries, as defined in ORS 197.295, to protect the public health and safety, accessible by transportation routes that minimize the threat to the public health and safety and to the environment and sufficient distance from parks, wilderness and recreation areas to prevent adverse impacts on the public use and enjoyment of those areas.
(2) Subject to any applicable standards adopted under ORS 466.035, the design of the proposed facility:
(a) Allows for treatment or disposal of the range of hazardous waste or PCB as required by the commission; and
(b) Significantly adds to:
(A) The range of hazardous waste or PCB handled at a treatment or disposal facility currently permitted under ORS 466.005 to 466.385; or
(B) The type of technology employed at a treatment or disposal facility currently permitted under ORS 466.005 to 466.385.
(3) The proposed facility uses the best available technology for treating or disposing of hazardous waste or PCB as determined by the department or the United States Environmental Protection Agency.
(4) The need for the facility is demonstrated by:
(a) Lack of adequate current treatment or disposal capacity in Oregon, Washington, Idaho and Alaska to handle hazardous waste or PCB generated by Oregon companies;
(b) A finding that operation of the proposed facility would result in a higher level of protection of the public health and safety or environment; or
(c) Significantly lower treatment or disposal costs to Oregon companies.
(5) The proposed hazardous waste or PCB treatment or disposal facility has no major adverse effect on either:
(a) Public health and safety; or
(b) Environment of adjacent lands.
Cite this article: FindLaw.com - Oregon Revised Statutes Public Health and Safety § 466.055 - last updated January 01, 2023 | https://codes.findlaw.com/or/title-36-public-health-and-safety/or-rev-st-sect-466-055/
FindLaw Codes may not reflect the most recent version of the law in your jurisdiction. Please verify the status of the code you are researching with the state legislature before relying on it for your legal needs.
A free source of state and federal court opinions, state laws, and the United States Code. For more information about the legal concepts addressed by these cases and statutes, visit FindLaw’s Learn About the Law.
Get help with your legal needs
FindLaw’s Learn About the Law features thousands of informational articles to help you understand your options. And if you’re ready to hire an attorney, find one in your area who can help.
Search our directory by legal issue
Enter information in one or both fields (Required)