Learn About The Law
Get help with your legal needs
FindLaw’s Learn About the Law features thousands of informational articles to help you understand your options. And if you’re ready to hire an attorney, find one in your area who can help.
Current as of January 01, 2025 | Updated by Findlaw Staff
Subdivision 1. Correctional facilities; other manufacturers. (a) Plates required by this chapter may be manufactured by the Minnesota Correctional Facility-St. Cloud, the Minnesota Correctional Facility-Stillwater, or other facility established by law for the confinement of persons convicted of felony, upon order from the commissioner. The order must state the quality of material desired in the plates, the plate specifications, and the amount or number desired.
(b) Should the commissioner of corrections decide not to supply the required quantity of plates, or discontinue the manufacture of plates, the commissioner of public safety is authorized to seek other suppliers on a competitive basis.
Subd. 2. Laboratory testing; costs. (a) Materials purchased to be used in the manufacture of plates must be tested as to conformance with specifications established by the commissioner in a privately operated laboratory service to be designated by the commissioner. The cost of the laboratory must be included in the cost of materials purchased.
(b) The cost of delivery of plates to the commissioner at places designated by the commissioner must be included in the expenses incurred in their manufacture.
Subd. 3. Specifications. The commissioner shall establish new or revised specifications for the material and equipment used in the manufacture of plates ordered for manufacture after August 1, 1975, and may from time to time revise the specifications; provided that the specifications conform to the requirements ofsection 168.12. In establishing new or revised specifications, the commissioner shall consult with and give consideration to the advice and recommendations of representatives of the Minnesota State Patrol, local police officers' associations, and the county sheriffs' association.
Subd. 4. Appropriations. (a) Money appropriated to the Department of Public Safety to procure the plates for any fiscal year or years is available for allotment, encumbrance, and expenditure from and after the date of the enactment of the appropriation. Materials and equipment used in the manufacture of plates are subject only to the approval of the commissioner.
(b) This section contemplates that money to be appropriated to the Department of Public Safety to carry out the terms and provisions of this section will be appropriated by the legislature from the highway user tax distribution fund.
(c) A sum sufficient is appropriated annually from the driver and vehicle services operating account undersection 299A.705to the commissioner to pay the costs of purchasing, delivering, and mailing plates, registration stickers, and registration notices.
Cite this article: FindLaw.com - Minnesota Statutes Transportation (Ch. 160-174A) § 168.381. Manufacture of vehicle plates; appropriations - last updated January 01, 2025 | https://codes.findlaw.com/mn/transportation-ch-160-174a/mn-st-sect-168-381/
FindLaw Codes may not reflect the most recent version of the law in your jurisdiction. Please verify the status of the code you are researching with the state legislature before relying on it for your legal needs.
A free source of state and federal court opinions, state laws, and the United States Code. For more information about the legal concepts addressed by these cases and statutes, visit FindLaw’s Learn About the Law.
Get help with your legal needs
FindLaw’s Learn About the Law features thousands of informational articles to help you understand your options. And if you’re ready to hire an attorney, find one in your area who can help.
Search our directory by legal issue
Enter information in one or both fields (Required)