Kentucky Revised Statutes Title XXVI. Occupations and Professions § 322.340.Licensee to obtain seal or stamp; use of seal or stamp

(1) Each professional engineer or professional land surveyor shall, upon licensure, obtain a seal or stamp of the design authorized by the board, bearing his or her name, license number, and the words “Licensed Professional Engineer” or “Licensed Professional Land Surveyor.”

(2) Use of the stamp, seal, or signature in an electronic transaction shall be conducted in accordance with administrative regulations promulgated by the board under KRS 322.290(13).

(3) The seal or stamp, signature, and the date shall be used to provide certification for all reports, specifications, drawings, and plans, if presented to a client or any public or governmental agency. Reproduction of original signatures shall be adequate to meet the requirements of this subsection.

(4) The seal or stamp and signature shall be used by licensees only if the work being stamped was under the licensee's complete direction and control.

(5) Every survey plat and physical description prepared by a professional land surveyor and submitted to a client or any public or governmental agency shall display the certification by the professional land surveyor under whose supervision the plat or description was prepared.

(6) It shall be unlawful for a licensee to affix, or permit to be affixed, his or her seal, stamp, or signature to any document described in subsection (3) or (5) of this section:

(7) A professional engineer shall check and have complete dominion and control of the design and engineering work of any engineer not licensed to practice in this state. Complete dominion and control shall include possession of the sealed and signed reproducible construction documents with all supporting design calculations, indicating all changes in the design.