Current as of October 03, 2022 | Updated by FindLaw Staff
Welcome to FindLaw's Cases & Codes, a free source of state and federal court opinions, state laws, and the United States Code. For more information about the legal concepts addressed by these cases and statutes, visit FindLaw's Learn About the Law.
With respect to in-line inspections and floor inspections, prunes in a particular lot shall, subject to the other applicable requirements of this section, be considered as being according to a particular size category prescribed in § 993.515 if the average size count of the prunes in such lot falls within the range of the size counts specified for such size category, and the count per pound of 10 ounces of the smallest prunes in a sample of 100 ounces varies from the count per pound of 10 ounces of the largest prunes in such sample by no more than 45 points.
Cite this article: FindLaw.com - Code of Federal Regulations Title 7. Agriculture § 7.993.516 Tolerances and limitations - last updated October 03, 2022 | https://codes.findlaw.com/cfr/title-7-agriculture/cfr-sect-7-993-516/
FindLaw Codes may not reflect the most recent version of the law in your jurisdiction. Please verify the status of the code you are researching with the state legislature or via Westlaw before relying on it for your legal needs.