Current as of October 03, 2022 | Updated by FindLaw Staff
Welcome to FindLaw's Cases & Codes, a free source of state and federal court opinions, state laws, and the United States Code. For more information about the legal concepts addressed by these cases and statutes, visit FindLaw's Learn About the Law.
The maintenance tolerances for sieves used in performing official inspection services shall be:
(a) Thickness of metal: ±0.0015 inch.
(b) Accuracy of perforation: ±0.001 inch from design specification.
(c) Sieving accuracy:
|
Tolerance |
||
|---|---|---|
|
Sieve description |
Direct comparison |
Sample exchange |
|
.064 x 3/8 inch oblong |
±0.2 percent, mean deviation from standard sieve using wheat |
±0.3 percent, mean deviation from standard sieve using wheat |
|
5/64 x 3/4 inch slotted |
±0.3 percent, mean deviation from standard sieve using barley |
±0.5 percent, mean deviation from standard sieve using barley |
|
55/64 x 3/4 inch slotted |
±0.5 percent, mean deviation from standard sieve using barley |
±0.7 percent, mean deviation from standard sieve using barley |
|
6/64 x 3/4 inch slotted |
±0.7 percent, mean deviation from standard sieve using barley |
±1.0 percent, mean deviation from standard sieve using barley |
Cite this article: FindLaw.com - Code of Federal Regulations Title 7. Agriculture § 7.801.8 Tolerances for sieves - last updated October 03, 2022 | https://codes.findlaw.com/cfr/title-7-agriculture/cfr-sect-7-801-8/
FindLaw Codes may not reflect the most recent version of the law in your jurisdiction. Please verify the status of the code you are researching with the state legislature or via Westlaw before relying on it for your legal needs.