Code of Federal Regulations Title 50. Wildlife and Fisheries § 50.29.97 What additional information must be included if I am proposing production operations?

(a) The dimensions and the to-scale layout of the well pad, clearly identifying well locations, noting partial reclamation areas;  gathering, separation, metering, and storage equipment;  electrical lines;  fences;  spill control equipment or structures, including lined areas, artificial lift equipment, tank batteries, treating and separating vessels, secondary or enhanced recovery facilities, water disposal facilities, gas compression and/or injection facilities;  metering points;  sales point (if on lease);  tanker pickup points;  gas compressor, including size and type (if applicable);  and any other well site equipment.

(b) A general description of anticipated stimulations, servicing, and workovers.

(c) A description of the procedures and equipment used to maintain well control.

(d) A description of the method and means used to transport produced oil and gas, including vehicular transport;  flowline and gathering line construction and operation, pipe size, and operating pressure;  cathodic protection methods;  surface equipment use;  surface equipment location;  maintenance procedures;  maintenance schedules;  pressure detection methods;  and shutdown procedures.

(e) A road and well pad maintenance plan, including equipment and materials to maintain the road surface and control erosion.

(f) A vegetation management plan on well sites, roads, pipeline corridors, and other disturbed surface areas, including control of noxious and invasive species.

(g) A stormwater management plan on the well site.

(h) A produced water storage and disposal plan.

(i) A description of the equipment, materials, and procedures proposed for well plugging.