Learn About The Law
Get help with your legal needs
FindLaw’s Learn About the Law features thousands of informational articles to help you understand your options. And if you’re ready to hire an attorney, find one in your area who can help.
Current as of January 02, 2025 | Updated by Findlaw Staff
(a) Except as provided in paragraph (b) of this section, alinement may not deviate from uniformity more than the amount prescribed in the following table:
|
Class of track |
Tangent track |
Curved track |
|
|---|---|---|---|
|
The deviation of the mid-offset from a 62-foot line 1 may not be more than—(inches) |
The deviation of the mid-ordinate from a 31-foot chord 2 may not be more than—(inches) |
The deviation of the mid-ordinate from a 62-foot chord 2 may not be more than—(inches) |
|
|
Class 1 track |
5 |
3 N/A |
5 |
|
Class 2 track |
3 |
3 N/A |
3 |
|
Class 3 track |
1 3/4 |
1 1/4 |
1 3/4 |
|
Class 4 track |
1 1/2 |
1 |
1 1/2 |
|
Class 5 track |
3/4 |
1/2 |
5/8 |
1 The ends of the line shall be at points on the gage side of the line rail, five-eighths of an inch below the top of the railhead. Either rail may be used as the line rail; however, the same rail shall be used for the full length of that tangential segment of the track.
2 The ends of the chord shall be at points on the gage side of the outer rail, five-eighths of an inch below the top of the railhead.
3 N/A—Not Applicable
(b) For operations at a qualified cant deficiency, Eu, of more than 5 inches, the alinement of the outside rail of the curve may not deviate from uniformity more than the amount prescribed in the following table:
|
Class of track |
Curved track |
|
|---|---|---|
|
The deviation of the mid-ordinate from a 31-foot chord 1 may not be more than—(inches) |
The deviation of the mid-ordinate from a 62-foot chord 1 may not be more than—(inches) |
|
|
Class 1 track 2 |
3 N/A |
1 1/4 |
|
Class 2 track 2 |
3 N/A |
1 1/4 |
|
Class 3 track |
3/4 |
1 1/4 |
|
Class 4 track |
3/4 |
7/8 |
|
Class 5 track |
1/2 |
5/8 |
1 The ends of the chord shall be at points on the gage side of the outer rail, five-eighths of an inch below the top of the railhead.
2 Restraining rails or other systems may be required for derailment prevention.
3 N/A—Not Applicable
Cite this article: FindLaw.com - Code of Federal Regulations Title 49. Transportation § 49.213.55 Track alinement - last updated January 02, 2025 | https://codes.findlaw.com/cfr/title-49-transportation/cfr-sect-49-213-55/
FindLaw Codes may not reflect the most recent version of the law in your jurisdiction. Please verify the status of the code you are researching with the state legislature before relying on it for your legal needs.
A free source of state and federal court opinions, state laws, and the United States Code. For more information about the legal concepts addressed by these cases and statutes, visit FindLaw’s Learn About the Law.
Get help with your legal needs
FindLaw’s Learn About the Law features thousands of informational articles to help you understand your options. And if you’re ready to hire an attorney, find one in your area who can help.
Search our directory by legal issue
Enter information in one or both fields (Required)