Code of Federal Regulations Title 49. Transportation § 49.178.522 Standards for composite packagings with inner plastic receptacles

(1) 6HA1 for a plastic receptacle within a protective steel drum;

(2) 6HA2 for a plastic receptacle within a protective steel crate or box;

(3) 6HB1 for a plastic receptacle within a protective aluminum drum.

(4) 6HB2 for a plastic receptacle within a protective aluminum crate or box.

(5) 6HC for a plastic receptacle within a protective wooden box.

(6) 6HD1 for a plastic receptacle within a protective plywood drum;

(7) 6HD2 for a plastic receptacle within a protective plywood box;

(8) 6HG1 for a plastic receptacle within a protective fiber drum;

(9) 6HG2 for a plastic receptacle within a protective fiberboard box;

(10) 6HH1 for a plastic receptacle within a protective plastic drum;  and

(11) 6HH2 for a plastic receptacle within a protective plastic box.

(1) Inner receptacles must be constructed under the applicable construction requirements prescribed in § 178.509(b) (1) through (7) of this subpart.

(2) The inner plastic receptacle must fit snugly inside the outer packaging, which must be free of any projections which may abrade the plastic material.

(3) Outer packagings must be constructed as follows:

(4) Maximum capacity of inner receptacles is as follows:  6HA1, 6HB1, 6HD1, 6HG1, 6HH1–250 L (66 gallons);  6HA2, 6HB2, 6HC, 6HD2, 6HG2, 6HH2–60 L (16 gallons).

(5) Maximum net mass is as follows:  6HA1, 6HB1, 6HD1, 6HG1, 6HH1–400 kg (882 pounds);  6HB2, 6HC, 6HD2, 6HG2, 6HH2–75 kg (165 pounds).