Code of Federal Regulations Title 49. Transportation § 49.178.255–14 Marking

(a) In addition to markings required by Section VIII of the ASME Code (IBR, see § 171.7 of this subchapter), every tank shall bear permanent marks at least 1/8–inch high stamped into the metal near the center of one of the tank heads or stamped into a plate permanently attached to the tank by means of brazing or welding or other suitable means as follows:

Manufacturer's name __________ Serial No.

DOT specification

Nominal capacity __________ (gallons)

Tare weight __________ (pounds)

Date of manufacture

(b) [Reserved]