Skip to main content
Find a Lawyer

Code of Federal Regulations Title 42. Public Health § 42.493.931 Routine chemistry

Current as of January 02, 2025 | Updated by Findlaw Staff

(a) Program content and frequency of challenge. To be approved for proficiency testing for routine chemistry, a program must provide a minimum of five samples per testing event. There must be at least three testing events at approximately equal intervals per year. The annual program must provide samples that cover the clinically relevant range of values that would be expected in patient specimens. The specimens may be provided through mailed shipments or, at HHS' option, may be provided to HHS or its designee for on-site testing.

(b) Challenges per testing event. The minimum number of challenges per testing event a program must provide for each analyte or test procedure listed below is five serum, plasma or blood samples.

Analyte or Test Procedure

Alanine aminotransferase (ALT/SGPT)

Albumin

Alkaline phosphatase

Amylase

Aspartate aminotransferase (AST/SGOT)

Bilirubin, total

Blood gas (pH, pO2, and pCO2)

Calcium, total

Chloride

Cholesterol, total

Cholesterol, high density lipoprotein

Creatine kinase

Creatine kinase, isoenzymes

Creatinine

Glucose (Excluding measurements on devices cleared by FDA for home use)

Iron, total

Lactate dehydrogenase (LDH)

LDH isoenzymes

Magnesium

Potassium

Sodium

Total Protein

Triglycerides

Urea Nitrogen

Uric Acid

(c) Evaluation of a laboratory's analyte or test performance. HHS approves only those programs that assess the accuracy of a laboratory's responses in accordance with paragraphs (c)(1) through (5) of this section.

(1) To determine the accuracy of a laboratory's response for qualitative and quantitative chemistry tests or analytes, the program must compare the laboratory's response for each analyte with the response that reflects agreement of either 80 percent of ten or more referee laboratories or 80 percent or more of all participating laboratories. The score for a sample in routine chemistry is either the score determined under paragraph (c)(2) or (3) of this section.

(2) For quantitative chemistry tests or analytes, the program must determine the correct response for each analyte by the distance of the response from the target value. After the target value has been established for each response, the appropriateness of the response must be determined by using either fixed criteria based on the percentage difference from the target value or the number of standard deviations (SDs) the response differs from the target value.

Criteria for Acceptable Performance

The criteria for acceptable performance are—

Analyte or test

Criteria for acceptable
performance

Alanine aminotransferase (ALT/SGPT)․․․․․․․․․․

Target value ±20%.

Albumin․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․

Target value ±10%.

Alkaline phosphatase․․․․․․․․․․․․․․․․․․․․․․․․․

Target value ±30%.

Amylase․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․

Target value ±30%.

Aspartate aminotransferase (AST/SGOT)․․․․․․․․

Target value ±20%.

Bilirubin, total․․․․․․․․․․․․․․․․․․․․․․․․․․․․․

Target value ±0.4 mg/dL or ±20% (greater).

Blood gas pO2․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․

Target value ±3 SD.

pCO2․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․

Target value ±5 mm Hg or ±8% (greater).

pH․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․

Target value ±0.04.

Calcium, total․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․

Target value ±1.0 mg/dL.

Chloride․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․

Target value ±5%.

Cholesterol, total․․․․․․․․․․․․․․․․․․․․․․․․․․․

Target value ±10%.

Cholesterol, high density
lipoprotein․․․․․․․․

Target value ±30%.

Creatine kinase․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․

Target value ±30%.

Creatine kinase isoenzymes․․․․․․․․․․․․․․․․․․․

MB elevated (presence or absence) or Target value ±3SD.

Creatinine․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․

Target value  ±0.3 mg/dL or ±15% (greater).

Glucose (excluding glucose performed on monitoring devices cleared by FDA for home use

Target value ±6 mg/dl or ±10% (greater).

Iron, total․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․

Target value ±20%.

Lactate dehydrogenase (LDH)․․․․․․․․․․․․․․․․․․

Target value ±20%.

LDH isoenzymes․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․

LDH1/LDH2 (+ or -) or Target value ±30%.

Magnesium․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․

Target value ±25%.

Potassium․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․

Target value ±0.5 mmol/L.

Sodium․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․

Target value ±4 mmol/L.

Total Protein․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․

Target value ±10%.

Triglycerides․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․

Target value ±25%.

Urea nitrogen․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․

Target value ±2 mg/dL or ±9% (greater).

Uric acid․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․

Target value ±17%.

(3) The criterion for acceptable performance for qualitative routine chemistry tests is positive or negative.

(4) To determine the analyte testing event score, the number of acceptable analyte responses must be averaged using the following formula:

Number of acceptable

responses for the analyte

x 100 =

Analyte score for

Total number of challenges

the testing event

for the analyte

(5) To determine the overall testing event score, the number of correct responses for all analytes must be averaged using the following formula:

Number of acceptable

responses for all challenges

x 100 =

Testing event

Total number of

score

all challenges
Previous Part of Code Next Part of Code
Back to Chapter List

Cite this article: FindLaw.com - Code of Federal Regulations Title 42. Public Health § 42.493.931 Routine chemistry - last updated January 02, 2025 | https://codes.findlaw.com/cfr/title-42-public-health/cfr-sect-42-493-931/

FindLaw Codes may not reflect the most recent version of the law in your jurisdiction. Please verify the status of the code you are researching with the state legislature before relying on it for your legal needs.

Was this helpful?

Welcome to FindLaw's Cases & Codes

A free source of state and federal court opinions, state laws, and the United States Code. For more information about the legal concepts addressed by these cases and statutes, visit FindLaw’s Learn About the Law.

Go to Learn About the Law

Latest Blog Posts

For Legal Professionals

Learn About The Law

Get help with your legal needs

FindLaw’s Learn About the Law features thousands of informational articles to help you understand your options. And if you’re ready to hire an attorney, find one in your area who can help.

Go to Learn About the Law

Need to Find an Attorney?

Search our directory by legal issue

Enter information in one or both fields (Required)

Copied to clipboard