Learn About The Law
Get help with your legal needs
FindLaw’s Learn About the Law features thousands of informational articles to help you understand your options. And if you’re ready to hire an attorney, find one in your area who can help.
Current as of January 02, 2025 | Updated by Findlaw Staff
In addition to the information required by § 98.3(c), each annual report must contain the information specified in paragraphs (a) or (b) of this section, as appropriate for each soda ash manufacturing facility.
(a) If a CEMS is used to measure CO2 emissions, then you must report under this subpart the relevant information required under § 98.36 and the following information in this paragraph (a):
(1) Annual consumption of trona or liquid alkaline feedstock for each manufacturing line (tons).
(2) Annual production of soda ash for each manufacturing line (tons).
(3) Annual production capacity of soda ash for each manufacturing line (tons).
(4) Identification number of each manufacturing line.
(b) If a CEMS is not used to measure CO2 emissions, then you must report the information listed in this paragraph (b):
(1) Identification number of each manufacturing line.
(2) Annual process CO2 emissions from each soda ash manufacturing line (metric tons).
(3) Annual production of soda ash for each manufacturing line (tons).
(4) Annual production capacity of soda ash for each manufacturing line (tons).
(5) to (7) [Reserved by 79 FR 63798]
(8) Whether CO2 emissions for each manufacturing line were calculated using a trona input method as described in Equation CC–1 of this subpart, a soda ash output method as described in Equation CC–2 of this subpart, or a site-specific emission factor method as described in Equations CC–3 through CC–5 of this subpart.
(9) Number of manufacturing lines located used to produce soda ash.
(10) If you produce soda ash using the liquid alkaline feedstock process and use the site-specific emission factor method (§ 98.293(b)(3)) to estimate emissions then you must report the following relevant information for each manufacturing line or stack:
(i) Stack gas volumetric flow rate during performance test (dscfm).
(ii) Hourly CO2 concentration during performance test (percent CO2).
(iii) CO2 emission factor (metric tons CO2/metric tons of process vent flow from mine water stripper/evaporator).
(iv) CO2 mass emission rate during performance test (metric tons/hour).
(v) Average process vent flow from mine water stripper/evaporator during performance test (pounds/hour).
(vi) Annual process vent flow rate from mine water stripper/evaporator (thousand pounds/hour).
(11) Number of times missing data procedures were used and for which parameter as specified in this paragraph (b)(11):
(i) Trona or soda ash (number of months).
(ii) Inorganic carbon contents of trona or soda ash (weeks).
(iii) Process vent flow rate from mine water stripper/evaporator (number of months).
Cite this article: FindLaw.com - Code of Federal Regulations Title 40. Protection of Environment § 40.98.296 Data reporting requirements - last updated January 02, 2025 | https://codes.findlaw.com/cfr/title-40-protection-of-environment/cfr-sect-40-98-296/
FindLaw Codes may not reflect the most recent version of the law in your jurisdiction. Please verify the status of the code you are researching with the state legislature before relying on it for your legal needs.
A free source of state and federal court opinions, state laws, and the United States Code. For more information about the legal concepts addressed by these cases and statutes, visit FindLaw’s Learn About the Law.
Get help with your legal needs
FindLaw’s Learn About the Law features thousands of informational articles to help you understand your options. And if you’re ready to hire an attorney, find one in your area who can help.
Search our directory by legal issue
Enter information in one or both fields (Required)