Code of Federal Regulations Title 40. Protection of Environment § 40.721.11123 Carboxylic acids, C6–18 and C8–15–di-, polymers with diethylene glycol, glycerol, oleic acid, phthalic, acid and sorbitol

(i) Protection in the workplace. Requirements as specified in § 721.63(a)(1), (a)(2)(i), (ii), (iii), (iv), (a)(3), (when determining which persons are reasonably likely to be exposed as required for § 721.63(a)(1) engineering control measures (e.g., enclosure or confinement of the operation, general and local ventilation) or administrative control measures (e.g., workplace policies and procedures) shall be considered and implemented to prevent exposure, where feasible), (b)(concentrations set at 1.0%) and (c).

(ii) Hazard communication. Requirements as specified in § 721.72(a), (b), (c), (d), (e)(concentration set at 1.0%), (f), (g)(1)(vi), (ix), (g)(2)(i), (ii), (iii), (v), (g)(3)(i), (g)(4)(iii) and (g)(5). Alternative hazard and warning statements that meet the criteria of the Globally Harmonized System (GHS) and OSHA Hazard Communication Standard may be used.

(iii) Industrial, commercial, and consumer activities. Requirements as specified in § 721.80(q). It is a significant new use to use the substance other than as an aromatic polyester polyol for manufacturing rigid foam. It is a significant new use to manufacture the substance with residual phthalate greater than 0.1% by weight. It is a significant new use to modify the manufacturing, processing or use activities of the PMN substance to result in the generation of a vapor, mist or aerosol.

(iv) Release to water. Requirements as specified in § 721.90(a)(1), (b)(1), and (c)(1).