If you operate a dry rotary dryer, you must demonstrate that your dryer processes
furnish with an inlet moisture content of less than or equal to 30 percent (by weight,
dry basis) and operates with a dryer inlet temperature of less than or equal to 600°F. You must designate and clearly identify each dry rotary dryer. You must record the inlet furnish moisture content (dry basis) and inlet dryer operating
temperature according to § 63.2269(a), (b), and (c) and § 63.2270 for a minimum of 30 calendar days. You must submit the highest recorded 24–hour average inlet furnish moisture content
and the highest recorded 24–hour average dryer inlet temperature with your Notification
of Compliance Status. In addition, you must submit with the Notification of Compliance Status a signed
statement by a responsible official that certifies with truth, accuracy, and completeness
that the dry rotary dryer will dry furnish with a maximum inlet moisture content less
than or equal to 30 percent (by weight, dry basis) and will operate with a maximum
inlet temperature of less than or equal to 600°F in the future.
FindLaw Codes may not reflect the most recent version of the law in your jurisdiction. Please verify the status of the code you are researching with the state legislature or via Westlaw before relying on it for your legal needs.
Was this helpful?
Response sent, thank you
Welcome to FindLaw's Cases & Codes
A free source of state and federal court opinions, state laws, and the United States Code. For more information about the legal concepts addressed by these cases and statutes, visit FindLaw's Learn About the Law.