Learn About the Law
Get help with your legal needs
FindLaw’s Learn About the Law features thousands of informational articles to help you understand your options. And if you’re ready to hire an attorney, find one in your area who can help.
Current as of October 02, 2022 | Updated by FindLaw Staff
(a) The materials listed in this section are incorporated by reference in the paragraphs noted in §59.401. These incorporations by reference were approved by the Director of the Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. These materials are incorporated as they exist on the date of the approval, and notice of any changes in these materials will be published in the Federal Register. The materials are available for purchase at the corresponding addresses noted below, and all are available for inspection at the Air and Radiation Docket and Information Center, U.S. EPA, 401 M St., SW., Washington, DC 20460; at the EPA Library (MD–35), U.S. EPA, Research Triangle Park, North Carolina; or at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202–741–6030, or go to: http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html.
(b) The materials listed below are available for purchase at the following address: American Society for Testing and Materials (ASTM), 100 Barr Harbor Drive, West Conshohocken, PA 19428–2959.
(1) ASTM Method C 1315–95, Standard Specification for Liquid Membrane–Forming Compounds Having Special Properties for Curing and Sealing Concrete, incorporation by reference approved for § 59.401, Concrete curing and sealing compound.
(2) ASTM Method D 523–89, Standard Test Method for Specular Gloss, incorporation by reference approved for § 59.401, Flat coating and Nonflat coating.
(3) ASTM Method D 1640–83 (Reapproved 1989), Standard Test Methods for Drying, Curing, or Film Formation of Organic Coatings at Room Temperature, incorporation by reference approved for § 59.401, Quick-dry enamel and Quick-dry primer, sealer, and undercoater.
(4) ASTM Method D 3912–80 (Reapproved 1989), Standard Test Method for Chemical Resistance of Coatings Used in Light–Water Nuclear Power Plants, incorporation by reference approved for § 59.401, Nuclear coating.
(5) ASTM Method D 4082–89, Standard Test Method for Effects of Gamma Radiation on Coatings for Use in Light–Water Nuclear Power Plants, incorporation by reference approved for § 59.401, Nuclear coating.
(c) The following material is available from the AAMA, 1827 Walden Office Square, Suite 104, Schaumburg, IL 60173.
(1) AAMA 605–98, Voluntary Specification Requirements and Test Procedures for High Performance Organic Coatings on Aluminum Extrusions and Panels, incorporation by reference approved for § 59.401, Extreme high durability coating.
(2) [Reserved]
Cite this article: FindLaw.com - Code of Federal Regulations Title 40. Protection of Environment § 40.59.412 Incorporations by reference - last updated October 02, 2022 | https://codes.findlaw.com/cfr/title-40-protection-of-environment/cfr-sect-40-59-412/
FindLaw Codes may not reflect the most recent version of the law in your jurisdiction. Please verify the status of the code you are researching with the state legislature or via Westlaw before relying on it for your legal needs.
A free source of state and federal court opinions, state laws, and the United States Code. For more information about the legal concepts addressed by these cases and statutes, visit FindLaw's Learn About the Law.
Get help with your legal needs
FindLaw’s Learn About the Law features thousands of informational articles to help you understand your options. And if you’re ready to hire an attorney, find one in your area who can help.
Search our directory by legal issue
Enter information in one or both fields (Required)