Code of Federal Regulations Title 40. Protection of Environment § 40.51.214 Continuous emission monitoring

(1) Require stationary sources subject to emission standards as part of an applicable plan to install, calibrate, maintain, and operate equipment for continuously monitoring and recording emissions;  and

(2) Provide other information as specified in appendix P of this part.

(1) Identify the types of sources, by source category and capacity, that must install the equipment;  and

(2) Identify for each source category the pollutants which must be monitored.

(d)(1) The procedures must contain provisions that require the owner or operator of each source subject to continuous emission monitoring and recording requirements to maintain a file of all pertinent information for at least two years following the date of collection of that information.

(2) The information must include emission measurements, continuous monitoring system performance testing measurements, performance evaluations, calibration checks, and adjustments and maintenance performed on such monitoring systems and other reports and records required by appendix P of this part.

(f)(1) The procedures must provide that sources subject to the requirements of paragraph (c) of this section must have installed all necessary equipment and shall have begun monitoring and recording within 18 months after either—

(2) The State may grant reasonable extensions of this period to sources that—