Skip to main content

Code of Federal Regulations Title 40. Protection of Environment § 40.430.77 Pretreatment standards for new sources (PSNS)

Welcome to FindLaw's Cases & Codes, a free source of state and federal court opinions, state laws, and the United States Code. For more information about the legal concepts addressed by these cases and statutes, visit FindLaw's Learn About the Law.

(a) The following applies to mechanical pulp facilities where pulp and paper at groundwood mills are produced through the application of the thermo-mechanical process;  mechanical pulp facilities where the integrated production of pulp and coarse paper, molded pulp products, and newsprint at groundwood mills occurs;  and mechanical pulp facilities where the integrated production of pulp and fine paper at groundwood mills occurs:  except as provided in 40 CFR 403.7, any new source subject to this subpart that introduces pollutants into a publicly owned treatment works must comply with 40 CFR part 403 and achieve the following pretreatment standards for new sources (PSNS). Pentachlorophenol and trichlorophenol limitations are only applicable at facilities where chlorophenolic-containing biocides are used. Permittees not using chlorophenolic-containing biocides must certify to the permit-issuing authority that they are not using these biocides. Zinc limitations are only applicable at facilities where zinc hydrosulfite is used as a bleaching agent. Permittees not using zinc hydrosulfite as a bleaching agent must certify to the permit issuing authority that they are not using this bleaching compound:

Subpart G

[PSNS for mechanical pulp facilities where pulp and paper at groundwood mills are produced through the application of the thermo-mechanical process]

Maximum for any 1 day

Pollutant or pollutant property

Milligrams/liter (mg/l)

Kg/kkg (or pounds per 1,000 lb) of producta

Pentachlorophenol

(0.017)(13.8)/y

0.00097

Trichlorophenol

(0.015)(13.8)/y

0.00088

Zinc

(3.0)(13.8)/y

0.17

y = wastewater discharged in kgal per ton of product.

a The following equivalent mass limitations are provided as guidance in cases when POTWs find it necessary to impose mass effluent limitations.

Subpart G

[PSNS for mechanical pulp facilities where the integrated production of pulp and coarse paper, molded pulp products, and newsprint at groundwood mills occurs]

Maximum for any 1 day

Pollutant or pollutant property

Milligrams/liter (mg/l)

Kg/kkg (or pounds per 1,000 lb) of producta

Pentachlorophenol

(0.016)(16.8)/y

0.0011

Trichlorophenol

(0.014)(16.8)/y

0.00099

Zinc

(3.0)(16.8)/y

0.21

y = wastewater discharged in kgal per ton of product.

a The following equivalent mass limitations are provided as guidance in cases when POTWs find it necessary to impose mass effluent limitations.

Subpart G

[PSNS for mechanical pulp facilities where the integrated production of pulp and fine paper at groundwood mills occurs]

Maximum for any 1 day

Pollutant or pollutant property

Milligrams/liter (mg/l)

Kg/kkg (or pounds per 1,000 lb) of producta

Pentachlorophenol

(0.016)(15.4)/y

0.0010

Trichlorophenol

(0.014)(15.4)/y

0.00092

Zinc

(3.0)(15.4)/y

0.19

y = wastewater discharged in kgal per ton of product.

a The following equivalent mass limitations are provided as guidance in cases when POTWs find it necessary to impose mass effluent limitations.

(b) [Reserved]

Cite this article: FindLaw.com - Code of Federal Regulations Title 40. Protection of Environment § 40.430.77 Pretreatment standards for new sources (PSNS) - last updated October 03, 2022 | https://codes.findlaw.com/cfr/title-40-protection-of-environment/cfr-sect-40-430-77/


FindLaw Codes may not reflect the most recent version of the law in your jurisdiction. Please verify the status of the code you are researching with the state legislature or via Westlaw before relying on it for your legal needs.

Was this helpful?

Thank you. Your response has been sent.

Copied to clipboard