Code of Federal Regulations Title 40. Protection of Environment § 40.257.100 Inactive CCR surface impoundments

(i) The owner or operator must have prepared and placed in the facility's operating record by December 17, 2015, a notification of intent to initiate closure of the inactive CCR surface impoundment pursuant to § 257.105(i)(1);

(ii) The owner or operator must have provided notification to the State Director and/or appropriate Tribal authority by January 19, 2016, of the intent to initiate closure of the inactive CCR surface impoundment pursuant to § 257.106(i)(1);  and

(iii) The owner or operator must have placed on its CCR Web site by January 19, 2016, the notification of intent to initiate closure of the inactive CCR surface impoundment pursuant to § 257.107(i)(1).

(i) No later than April 16, 2020, the owner or operator of the inactive CCR surface impoundment must:

(ii) An owner or operator of an inactive CCR surface impoundment who fails to demonstrate compliance with the requirements of paragraph (e)(2)(i) of this section is subject to the closure requirements of § 257.101(b)(1).

(i) No later than April 17, 2018, complete the documentation of liner type as set forth by § 257.71(a) and (b).

(ii) No later than June 16, 2017, place on or immediately adjacent to the CCR unit the permanent identification marker as set forth by § 257.73(a)(1).

(iii) No later than October 16, 2018, prepare and maintain an Emergency Action Plan as set forth by § 257.73(a)(3).

(iv) No later than April 17, 2018, compile a history of construction as set forth by § 257.73(b) and (c).

(v) No later than April 17, 2018, complete the initial hazard potential classification, structural stability, and safety factor assessments as set forth by § 257.73(a)(2), (b), (d), (e), and (f).

(i) No later than April 18, 2017, prepare the initial CCR fugitive dust control plan as set forth in § 257.80(b).

(ii) No later than April 17, 2018, prepare the initial inflow design flood control system plan as set forth in § 257.82(c).

(iii) No later than April 18, 2017, initiate the inspections by a qualified person as set forth by § 257.83(a).

(iv) No later than July 19, 2017, complete the initial annual inspection by a qualified professional engineer as set forth by § 257.83(b).

(i) No later than April 17, 2019, comply with groundwater monitoring requirements set forth in §§ 257.90(b) and 257.94(b);  and

(ii) No later than August 1, 2019, prepare the initial groundwater monitoring and corrective action report as set forth in § 257.90(e).

(i) No later than April 17, 2018, prepare an initial written closure plan as set forth in § 257.102(b);  and

§ 257.107(i)(ii) No later than April 17, 2018, prepare an initial written post-closure care plan as set forth in § 257.104(d).