(a) The manufacturer will continue to inspect consecutive batches until the batch sequence
is accepted or rejected. The batch sequence will be accepted or rejected based upon the number of rejected
batches. A sufficient number of consecutive batches will be inspected until the cumulative
number of rejected batches is less than or equal to the sequence acceptance number
or greater than or equal to the sequence rejection number appropriate for the cumulative
number of batches inspected. The acceptance and rejection numbers listed in Appendix I, Table III at the appropriate
code letter obtained according to § 204.57–2 will be used in determining whether the acceptance or rejection of a batch sequence
(b) Acceptance or rejection of a batch sequence takes places when the decision is made
on the last compressor required to make a decision under paragraph (a) of this section.
(c) If the batch sequence is accepted, the manufacturer will not be required to perform
any additional testing on compressors from subsequent batches pursuant to the initiating
(d) The Administrator may terminate testing earlier than required in paragraph (b) of
this section based on a request by the manufacturer accompanied by voluntary cessation
of distribution in commerce, from all plants, of compressors from the configuration
in question: Provided, That once production is reinitiated, the manufacturer must take the action described
in § 204.57–9 (a)(1) and (a)(2) prior to distribution in commerce of any compressors from any plant of the compressor
category or configuration in question.
FindLaw Codes may not reflect the most recent version of the law in your jurisdiction. Please verify the status of the code you are researching with the state legislature or via Westlaw before relying on it for your legal needs.
Was this helpful?
Response sent, thank you
Welcome to FindLaw's Cases & Codes
A free source of state and federal court opinions, state laws, and the United States Code. For more information about the legal concepts addressed by these cases and statutes, visit FindLaw's Learn About the Law.