Code of Federal Regulations Title 40. Protection of Environment § 40.158.2110 Microbial pesticides data requirements

(1) The following § 158.2120 through § 158.2150 identify the data requirements that are required to support registration of microbial pesticides. The variations in the test conditions are identified within the test notes.

(2) Each data table includes “use patterns” under which the individual data are required, with variations including all use patterns, food and nonfood uses for terrestrial and aquatic applications, greenhouse, indoor, forestry, and residential outdoor applications under certain circumstances.

(3) The categories for each data requirement are “R,” which stands for required, and “CR” which stands for conditionally required. If a bracket appears around the “R” or “CR,” the data are required for both the registration and experimental use permit requests. Generally, “R” indicates that the data are more likely required than for those data requirements with “CR.” However, in each case, the regulatory text preceding the data table and the test notes following the data table must be used to determine whether the data requirement must be satisfied.

(4) Each table identifies the test substance that is required to be tested to satisfy the data requirement. Test substances may include:  technical grade active ingredient (TGAI), manufacturing-use product (MP), end-use product (EP), typical end-use product (TEP), residue of concern, and pure active ingredient (PAI) or all of the above (All). Commas between the test substances (i.e., TGAI, EP) indicate that data may be required on the TGAI or EP or both depending on the conditions set forth in the test note. Data requirements which list two test substances (i.e., TGAI and EP) indicate that both are required to be tested. Data requirements that list only MP as the test substance apply to products containing solely the technical grade of the active ingredient and manufacturing-use products to which other ingredients have been intentionally added. Data requirements listing the EP as the test substance apply to any EP with an ingredient in the end-use formulation other than the active ingredient that is expected to enhance the toxicity of the product.