Code of Federal Regulations Title 40. Protection of Environment § 40.1090.200 Overview and general requirements

(a) Except as specified in subpart G of this part, gasoline, gasoline additives, and gasoline regulated blendstocks are subject to the standards in this subpart.

(b) Except for the sulfur average standard in § 1090.205(a) and the benzene average standards in § 1090.210(a) and (b), the standards in this part apply to gasoline, gasoline additives, and gasoline regulated blendstocks on a per-gallon basis. A gasoline manufacturer, gasoline additive manufacturer (e.g., an oxygenate or certified ethanol denaturant producer), or gasoline regulated blendstock producer (e.g., a certified butane or certified pentane producer) must demonstrate compliance with the per-gallon standards in this subpart by measuring fuel parameters in accordance with subpart N of this part.

(d) No person may produce, import, sell, offer for sale, distribute, offer to distribute, supply, offer for supply, dispense, store, transport, or introduce into commerce any gasoline, gasoline additive, or gasoline regulated blendstock that does not comply with any per-gallon standard set forth in this subpart.

(e) No person may sell, offer for sale, supply, offer for supply, dispense, transport, or introduce into commerce for use as fuel in any motor vehicle (as defined in Section 216(2) of the Clean Air Act, 42 U.S.C. 7550(2)) any gasoline that is produced with the use of additives containing lead, that contains more than 0.05 gram of lead per gallon, or that contains more than 0.005 grams of phosphorous per gallon.

(f) No fuel or fuel additive manufacturer may introduce into commerce gasoline or gasoline additives (including oxygenates) that are not “substantially similar” under 42 U.S.C. 7545(f)(1) or permitted under a waiver granted under 42 U.S.C. 7545(f)(4).