Learn About The Law
Get help with your legal needs
FindLaw’s Learn About the Law features thousands of informational articles to help you understand your options. And if you’re ready to hire an attorney, find one in your area who can help.
Current as of January 02, 2025 | Updated by Findlaw Staff
As stated in § 63.6002, you must show initial compliance with the emission limits for puncture sealant application affected sources according to the following table:
|
For . . . |
For the following emission limit . . . |
You have demonstrated initial compliance if . . . |
|---|---|---|
|
1. Sources complying with the overall control efficiency alternative in § 63.5989(a) |
The percent reduction option in Table 3 to this subpart, option 1 |
You demonstrate that you conducted the performance tests, determined the overall efficiency of your control system, demonstrated that the applicable limits in Table 3 to this subpart, option 1, have been achieved, and established the operating limits in Table 4 of this subpart for your equipment according to the applicable procedures in § 63.6000(b). |
|
2. Sources complying with the permanent total enclosure and control device efficiency alternative in § 63.5989(b) |
The percent reduction option in Table 3 to this subpart, option 1 |
You demonstrate that you conducted the performance tests, determined the individual efficiencies of your capture and control systems, demonstrated that the applicable limits in Table 3 to this subpart, option 1, have been achieved, and established the operating limits in Table 4 of this subpart for your equipment according to the applicable procedures in § 63.6000(b). |
|
3. Sources complying with the monthly average alternative in § 63.5989(c) without using an add-on control device |
The HAP constituent option in Table 3 to this subpart, option 2 |
You demonstrate that the monthly average HAP emissions for each monthly operating period do not exceed the HAP constituent emission limits in Table 3 to this subpart, option 2, determined according to the applicable procedures in § 63.6000(c) and (d)(1). |
|
4. Sources complying with the HAP constituent alternative in § 63.5989(d) by using an add-on control device |
The HAP constituent option in Table 3 to this subpart, option 2 |
You demonstrate that the monthly average HAP emissions for each monthly operating period do not exceed the HAP constituent emission limits in Table 3 to this subpart, option 2, determined according to the applicable procedures in § 63.6000(c), (d)(2) and (3), and (e) through (f). |
Cite this article: FindLaw.com - Code of Federal Regulations Title 40. Protection of Environment 40 CFR Pt. 63, Subpt. XXXX, Tbl. 8 Table 8 to Subpart XXXX of Part 63—Initial Compliance With the Emission - last updated January 02, 2025 | https://codes.findlaw.com/cfr/title-40-protection-of-environment/cfr-pt-40-63-subpt-xxxx-tbl-8/
FindLaw Codes may not reflect the most recent version of the law in your jurisdiction. Please verify the status of the code you are researching with the state legislature before relying on it for your legal needs.
A free source of state and federal court opinions, state laws, and the United States Code. For more information about the legal concepts addressed by these cases and statutes, visit FindLaw’s Learn About the Law.
Get help with your legal needs
FindLaw’s Learn About the Law features thousands of informational articles to help you understand your options. And if you’re ready to hire an attorney, find one in your area who can help.
Search our directory by legal issue
Enter information in one or both fields (Required)