Code of Federal Regulations Title 40. Protection of Environment 40 CFR Pt. 63, Subpt. WWWW, Tbl. 2 Table 2 to Subpart WWWW of Part 63—Compliance Dates for New and Existing Reinforced Plastic Composites Facilities

1. An existing source

a. Is a major source on or before the publication date of this subpart

April 21, 2006.

ii. You must accept and meet an enforceable HAP emissions limit below the major source threshold prior to April 21, 2006.

2. An existing source that is an area source

Becomes a major source after the publication date of this subpart

3 years after becoming a major source or April 21, 2006, whichever is later.

3. An existing source, and emits less than 100 tpy of organic HAP from the combination of all centrifugal casting and continuous lamination/casting operations at the time of initial compliance with this subpart

Subsequently increases its actual organic HAP emissions to 100 tpy or more from these operations, which requires that the facility must now comply with the standards in § 63.5805(b)

3 years of the date your semi-annual compliance report indicates your facility meets or exceeds the 100 tpy threshold.

4. A new source

Is a major source at startup

Upon startup or April 21, 2003, whichever is later.

5. A new source

Is an area source at startup and becomes a major source

Immediately upon becoming a major source.

6. A new source, and emits less than 100 tpy of organic HAP from the combination of all open molding, centrifugal casting, continuous lamination/casting, pultrusion, SMC and BMC manufacturing, and mixing operations at the time of initial compliance with this subpart

Subsequently increases its actual organic HAP emissions to 100 tpy or more from the combination of these operations, which requires that the facility must now meet the standards in § 63.5805(d)

3 years from the date that your semi-annual compliance report indicates your facility meets or exceeds the 100 tpy threshold.