Code of Federal Regulations Title 40. Protection of Environment 40 CFR Pt. 63, Subpt. MMMMM, Tbl. 7 Table 7 to Subpart MMMMM of Part 63—Applicability of General Provisions to Subpart MMMMM

§ 63.1

Initial applicability determination; applicability after standard established; permit requirements; extensions; notifications

Yes.

§ 63.2

Definitions

Yes

Additional definitions are found in § 63.8830.

§ 63.3

Units and abbreviations

Yes.

§ 63.4

Prohibited activities; compliance date; circumvention, severability

Yes.

§ 63.5

Construction/reconstruction applicability; applications; approvals

Yes.

§ 63.6(a)

Compliance with standards and maintenance requirements-applicability

Yes.

§ 63.6(b)(1)-(4)

Compliance dates for new or reconstructed sources

Yes

§ 63.8786 specifies compliance dates.

§ 63.6(b)(5)

Notification if commenced construction or reconstruction after proposal

Yes.

§ 63.6(b)(6)

[Reserved]

Yes.

§ 63.6(b)(7)

Compliance dates for new or reconstructed area sources that become major

Yes

§ 63.8786 specifies compliance dates.

§ 63.6(c)(1)-(2)

Compliance dates for existing sources

Yes

§ 63.8786 specifies compliance dates.

§ 63.6(c)(3)-(4)

[Reserved]

Yes.

§ 63.6(c)(5)

Compliance dates for existing area sources that become major

Yes

§ 63.8786 specifies compliance dates.

§ 63.6(d)

[Reserved]

Yes.

§ 63.6(e)(1)

Operation and maintenance requirements

Yes.

§ 63.6(e)(2)

[Reserved]

Yes.

§ 63.6(e)(3)

Startup, shutdown, and malfunction plans

Yes

Only applies to new or reconstructed flame lamination affected sources.

§ 63.6(f)(1)

Compliance except during SSM

Yes

Only applies to new or reconstructed flame lamination affected sources.

§ 63.6(f)(2)-(3)

Methods for determining compliance

Yes.

§ 63.6(g)

Use of an alternative nonopacity emission standard

Yes.

§ 63.6(h)

Compliance with opacity/visible emission standards

No

Subpart MMMMM does not specify opacity or visible emission standards.

§ 63.6(i)

Extension of compliance with emission standards

Yes.

§ 63.6(j)

Presidential compliance exemption

Yes.

§ 63.7(a)(1)-(2)

Performance test dates

Yes

Except for loop slitter affected sources as specified in § 63.8798(a).

§ 63.7(a)(3)

Administrator's section 114 authority to require a performance test

Yes.

§ 63.7(b)

Notification of performance test and rescheduling

Yes.

§ 63.7(c)

Quality assurance program and site-specific test plans

Yes.

§ 63.7(d)

Performance testing facilities

Yes.

§ 63.7(e)(1)

Conditions for conducting performance tests

Yes.

§ 63.7(f)

Use of an alternative test method

Yes.

§ 63.7(g)

Performance test data analysis, recordkeeping, and reporting

Yes.

§ 63.7(h)

Waiver of performance tests

Yes.

§ 63.8(a)(1)-(2)

Applicability of monitoring requirements

Yes

Unless otherwise specified, all of § 63.8 applies only to new or reconstructed flame lamination sources. Additional monitoring requirements for these sources are found in §§ 63.8794(f) and (g) and 63.8804.

§ 63.8(a)(3)

[Reserved]

Yes.

§ 63.8(a)(4)

Monitoring with flares

No

Subpart MMMMM does not refer directly or indirectly to § 63.11.

§ 63.8(b)

Conduct of monitoring and procedures when there are multiple effluents and multiple monitoring systems

Yes.

§ 63.8(c)(1)-(3)

Continuous monitoring system (CMS) operation and maintenance

Yes

Applies as modified by § 63.8794(f) and (g).

§ 63.8(c)(4)

Continuous monitoring system requirements during breakdown, out-of-control, repair, maintenance, and high-level calibration drifts

Yes

Applies as modified by § 63.8794(g).

§ 63.8(c)(5)

Continuous opacity monitoring system (COMS) minimum procedures

No

Subpart MMMMM does not have opacity or visible emission standards.

§ 63.8(c)(6)

Zero and high level calibration checks

Yes

Applies as modified by § 63.8794(f).

§ 63.8(c)(7)-(8)

Out-of-control periods, including reporting

Yes.

§ 63.8(d)-(e)

Quality control program and CMS performance evaluation

No

Applies as modified by § 63.8794(f) and (g).

§ 63.8(f)(1)-(5)

Use of an alternative monitoring method

Yes.

§ 63.8(f)(6)

Alternative to relative accuracy test

No

Only applies to sources that use continuous emissions monitoring systems (CEMS).

§ 63.8(g)

Data reduction

Yes

Applies as modified by § 63.8794(g).

§ 63.9(a)

Notification requirements—applicability

Yes.

§ 63.9(b)

Initial notifications

Yes

Except § 63.8816(c) requires new or reconstructed affected sources to submit the application for construction or reconstruction required by § 63.9(b)(1)(iii) in lieu of the initial notification.

§ 63.9(c)

Request for compliance extension

Yes.

§ 63.9(d)

Notification that a new source is subject to special compliance requirements

Yes.

§ 63.9(e)

Notification of performance test

Yes.

§ 63.9(f)

Notification of visible emissions/opacity test

No

Subpart MMMMM does not have opacity or visible emission standards.

§ 63.9(g)(1)

Additional CMS notifications—date of CMS performance evaluation

Yes.

§ 63.9(g)(2)

Use of COMS data

No

Subpart MMMMM does not require the use of COMS.

§ 63.9(g)(3)

Alternative to relative accuracy testing

No

Applies only to sources with CEMS.

§ 63.9(h)

Notification of compliance status

Yes.

§ 63.9(i)

Adjustment of submittal deadlines

Yes.

§ 63.9(j)

Change in previous information

Yes.

§ 63.9(k)

Electronic reporting procedures

Yes

Only as specified in § 63.9(j).

§ 63.10(a)

Recordkeeping/reporting applicability

Yes.

§ 63.10(b)(1)

General recordkeeping requirements

Yes

§§ 63.8820 and 63.8822 specify additional recordkeeping requirements.

§ 63.10(b)(2)(i)-(xi)

Records related to startup, shutdown, and malfunction periods and CMS

Yes

Only applies to new or reconstructed flame lamination affected sources.

§ 63.10(b)(2)(xii)

Records when under waiver

Yes.

§ 63.10(b)(2)(xiii)

Records when using alternative to relative accuracy test

No

Applies only to sources with CEMS.

§ 63.10(b)(2)(xiv)

All documentation supporting initial notification and notification of compliance status

Yes

§ 63.10(b)(3)

Recordkeeping requirements for applicability determinations

Yes.

§ 63.10(c)

Additional recordkeeping requirements for sources with CMS

Yes

Applies as modified by § 63.8794(g).

§ 63.10(d)(1)

General reporting requirements

Yes

§ 63.8818 specifies additional reporting requirements.

§ 63.10(d)(2)

Performance test results

Yes

§ 63.10(d)(3)

Opacity or visible emissions observations

No

Subpart MMMMM does not specify opacity or visible emission standards.

§ 63.10(d)(4)

Progress reports for sources with compliance extensions

Yes.

§ 63.10(d)(5)

Startup, shutdown, and malfunction reports

Yes

Only applies to new or reconstructed flame lamination affected sources.

§ 63.10(e)(1)

Additional CMS reports—general

Yes

Applies as modified by § 63.8794(g).

§ 63.10(e)(2)(i)

Results of CMS performance evaluations

Yes

Applies as modified by § 63.8794(g).

§ 63.10(e)(2)

Results of continuous opacity monitoring systems performance evaluations

No

Subpart MMMMM does require the use of COMS.

§ 63.10(e)(3)

Excess emissions/CMS performance reports

Yes

Only applies to new or reconstructed flame lamination affected sources.

§ 63.10(e)(4)

Continuous opacity monitoring system data reports

No

Subpart MMMMM does not require the use of COMS.

§ 63.10(f)

Recordkeeping/reporting waiver

Yes

§ 63.11.

Control device requirements—applicability

No

Facilities subject to subpart MMMMM do not use flares as control devices.

§ 63.12

State authority and delegations

Yes

§ 63.8828 lists those sections of subparts MMMMM and A that are not delegated.

§ 63.13

Addresses

Yes.

§ 63.14

Incorporation by reference

Yes

Subpart MMMMM does not incorporate any material by reference.

§ 63.15

Availability of information/confidentiality.

Yes.