Code of Federal Regulations Title 40. Protection of Environment 40 CFR Pt. 63, Subpt. JJJJJJ, Tbl. 4 Table 4 to Subpart JJJJJJ of Part 63—Performance (Stack) Testing Requirements

1. Particulate Matter

a. Select sampling ports location and the number of traverse points

Method 1 in appendix A-1 to part 60 of this chapter.

b. Determine velocity and volumetric flow-rate of the stack gas

Method 2, 2F, or 2G in appendix A-2 to part 60 of this chapter.

c. Determine oxygen and carbon dioxide concentrations of the stack gas

Method 3A or 3B in appendix A-2 to part 60 of this chapter, or ASTM D6522-00 (Reapproved 2005),^a or ANSI/ASME PTC 19.10-1981.^a

d. Measure the moisture content of the stack gas

Method 4 in appendix A-3 to part 60 of this chapter.

e. Measure the particulate matter emission concentration

Method 5 or 17 (positive pressure fabric filters must use Method 5D) in appendix A-3 and A-6 to part 60 of this chapter and a minimum 1 dscm of sample volume per run.

f. Convert emissions concentration to lb/MMBtu emission rates

Method 19 F-factor methodology in appendix A-7 to part 60 of this chapter.

2. Mercury

a. Select sampling ports location and the number of traverse points

Method 1 in appendix A-1 to part 60 of this chapter.

b. Determine velocity and volumetric flow-rate of the stack gas

Method 2, 2F, or 2G in appendix A-2 to part 60 of this chapter.

c. Determine oxygen and carbon dioxide concentrations of the stack gas

Method 3A or 3B in appendix A-2 to part 60 of this chapter, or ASTM D6522-00 (Reapproved 2005) ,^a or ANSI/ASME PTC 19.10-1981.^a

d. Measure the moisture content of the stack gas

Method 4 in appendix A-3 to part 60 of this chapter.

e. Measure the mercury emission concentration

Method 29, 30A, or 30B in appendix A-8 to part 60 of this chapter or Method 101A in appendix B to part 61 of this chapter or ASTM Method D6784-02.^a Collect a minimum 2 dscm of sample volume with Method 29 of 101A per run. Use a minimum run time of 2 hours with Method 30A.

f. Convert emissions concentration to lb/MMBtu emission rates

Method 19 F-factor methodology in appendix A-7 to part 60 of this chapter.

3. Carbon Monoxide

a. Select the sampling ports location and the number of traverse points

Method 1 in appendix A-1 to part 60 of this chapter.

b. Determine oxygen and carbon dioxide concentrations of the stack gas

Method 3A or 3B in appendix A-2 to part 60 of this chapter, or ASTM D6522-00 (Reapproved 2005),^a or ANSI/ASME PTC 19.10-1981.^a

c. Measure the moisture content of the stack gas

Method 4 in appendix A-3 to part 60 of this chapter.

d. Measure the carbon monoxide emission concentration

Method 10, 10A, or 10B in appendix A-4 to part 60 of this chapter or ASTM D6522-00 (Reapproved 2005) ^a and a minimum 1 hour sampling time per run.