Skip to main content
Find a Lawyer

Code of Federal Regulations Title 40. Protection of Environment 40 CFR Pt. 63, Subpt. HHHH, Tbl. 1 TABLE 1 TO SUBPART HHHH OF PART 63—MINIMUM REQUIREMENTS FOR MONITORING AND RECORDKEEPING

Current as of January 02, 2025 | Updated by Findlaw Staff

As stated in § 63.2998(c), you must comply with the minimum requirements for monitoring and recordkeeping in the following table:

You must monitor these parameters:

At this frequency:

And record for the monitored parameter:

1. Thermal oxidizer temperature 14

Continuously

15-minute and 3-hour block averages.

2. Other process or control device parameters specified in your OMM plan 24

As specified in your OMM plan

As specified in your OMM plan.

3. Urea-formaldehyde resin solids application rate 4

On each operating day, calculate the average lb/h application rate for each product manufactured during that day

The average lb/h value for each product manufactured during the day.

4. Resin free-formaldehyde content 4

For each lot of resin purchased

The value for each lot used during the operating day.

5. Loss-on-ignition 34

Measured at least once per day, for each product manufactured during that day

The value for each product manufactured during the operating day.

6. UF-to-latex ratio in the binder 34

For each batch of binder prepared the operating day

The value for each batch of binder prepared during the operating day.

7. Weight of the final mat product per square (lb/roofing square) 34

Each product manufactured during the operating day

The value for each product manufactured during the operating day.

8. Average nonwoven wet-formed fiberglass mat production rate (roofing square/h) 34

For each product manufactured during the operating day

The average value for each product manufactured during operating day.

1 Required if a thermal oxidizer is used to control formaldehyde emissions.

2 Required if process modifications or a control device other than a thermal oxidizer is used to control formaldehyde emissions.

3 These parameters must be monitored and values recorded, but no operating limits apply.

4 You are not required to monitor or record these parameters during periods when using a non-HAP binder. If you do not monitor these parameters during periods when using a non-HAP binder, you must record the dates and times that production of mat using the non-HAP binder began and ended.

Previous Part of Code Next Part of Code
Back to Chapter List

Cite this article: FindLaw.com - Code of Federal Regulations Title 40. Protection of Environment 40 CFR Pt. 63, Subpt. HHHH, Tbl. 1 TABLE 1 TO SUBPART HHHH OF PART 63—MINIMUM REQUIREMENTS FOR MONITORING AND RECORDKEEPING - last updated January 02, 2025 | https://codes.findlaw.com/cfr/title-40-protection-of-environment/cfr-pt-40-63-subpt-hhhh-tbl-1/

FindLaw Codes may not reflect the most recent version of the law in your jurisdiction. Please verify the status of the code you are researching with the state legislature before relying on it for your legal needs.

Was this helpful?

Welcome to FindLaw's Cases & Codes

A free source of state and federal court opinions, state laws, and the United States Code. For more information about the legal concepts addressed by these cases and statutes, visit FindLaw’s Learn About the Law.

Go to Learn About the Law

Latest Blog Posts

For Legal Professionals

Learn About The Law

Get help with your legal needs

FindLaw’s Learn About the Law features thousands of informational articles to help you understand your options. And if you’re ready to hire an attorney, find one in your area who can help.

Go to Learn About the Law

Need to Find an Attorney?

Search our directory by legal issue

Enter information in one or both fields (Required)

Copied to clipboard