Code of Federal Regulations Title 40. Protection of Environment 40 CFR Pt. 63, Subpt. DDDDD, Tbl. 5 TABLE 5 TO SUBPART DDDDD OF PART 63—PERFORMANCE TESTING REQUIREMENTS

1. Filterable PM

a. Select sampling ports location and the number of traverse points

Method 1 at 40 CFR part 60, appendix A-1 of this chapter.

b. Determine velocity and volumetric flow-rate of the stack gas

Method 2, 2F, or 2G at 40 CFR part 60, appendix A-1 or A-2 to part 60 of this chapter.

c. Determine oxygen or carbon dioxide concentration of the stack gas

Method 3A or 3B at 40 CFR part 60, appendix A-2 to part 60 of this chapter, or ANSI/ASME PTC 19.10-1981.^a

d. Measure the moisture content of the stack gas

Method 4 at 40 CFR part 60, appendix A-3 of this chapter.

e. Measure the PM emission concentration

Method 5 or 17 (positive pressure fabric filters must use Method 5D) at 40 CFR part 60, appendix A-3 or A-6 of this chapter.

f. Convert emissions concentration to lb per MMBtu emission rates

Method 19 F-factor methodology at 40 CFR part 60, appendix A-7 of this chapter.

2. TSM

a. Select sampling ports location and the number of traverse points

Method 1 at 40 CFR part 60, appendix A-1 of this chapter.

b. Determine velocity and volumetric flow-rate of the stack gas

Method 2, 2F, or 2G at 40 CFR part 60, appendix A-1 or A-2 of this chapter.

c. Determine oxygen or carbon dioxide concentration of the stack gas

Method 3A or 3B at 40 CFR part 60, appendix A-1 of this chapter, or ANSI/ASME PTC 19.10-1981.^a

d. Measure the moisture content of the stack gas

Method 4 at 40 CFR part 60, appendix A-3 of this chapter.

e. Measure the TSM emission concentration

Method 29 at 40 CFR part 60, appendix A-8 of this chapter

f. Convert emissions concentration to lb per MMBtu emission rates

Method 19 F-factor methodology at 40 CFR part 60, appendix A-7 of this chapter.

3. Hydrogen chloride

a. Select sampling ports location and the number of traverse points

Method 1 at 40 CFR part 60, appendix A-1 of this chapter.

b. Determine velocity and volumetric flow-rate of the stack gas

Method 2, 2F, or 2G at 40 CFR part 60, appendix A-2 of this chapter.

c. Determine oxygen or carbon dioxide concentration of the stack gas

Method 3A or 3B at 40 CFR part 60, appendix A-2 of this chapter, or ANSI/ASME PTC 19.10-1981.^a

d. Measure the moisture content of the stack gas

Method 4 at 40 CFR part 60, appendix A-3 of this chapter.

e. Measure the hydrogen chloride emission concentration

Method 26 or 26A (M26 or M26A) at 40 CFR part 60, appendix A-8 of this chapter.

f. Convert emissions concentration to lb per MMBtu emission rates

Method 19 F-factor methodology at 40 CFR part 60, appendix A-7 of this chapter.

4. Mercury

a. Select sampling ports location and the number of traverse points

Method 1 at 40 CFR part 60, appendix A-1 of this chapter.

b. Determine velocity and volumetric flow-rate of the stack gas

Method 2, 2F, or 2G at 40 CFR part 60, appendix A-1 or A-2 of this chapter.

c. Determine oxygen or carbon dioxide concentration of the stack gas

Method 3A or 3B at 40 CFR part 60, appendix A-1 of this chapter, or ANSI/ASME PTC 19.10-1981.^a

d. Measure the moisture content of the stack gas

Method 4 at 40 CFR part 60, appendix A-3 of this chapter.

e. Measure the mercury emission concentration

Method 29, 30A, or 30B (M29, M30A, or M30B) at 40 CFR part 60, appendix A-8 of this chapter or Method 101A at 40 CFR part 61, appendix B of this chapter, or ASTM Method D6784.^a

f. Convert emissions concentration to lb per MMBtu emission rates

Method 19 F-factor methodology at 40 CFR part 60, appendix A-7 of this chapter.

5. CO

a. Select the sampling ports location and the number of traverse points

Method 1 at 40 CFR part 60, appendix A-1 of this chapter.

b. Determine oxygen concentration of the stack gas

Method 3A or 3B at 40 CFR part 60, appendix A-3 of this chapter, or ASTM D6522-00 (Reapproved 2005), or ANSI/ASME PTC 19.10-1981.^a

c. Measure the moisture content of the stack gas

Method 4 at 40 CFR part 60, appendix A-3 of this chapter.

d. Measure the CO emission concentration

Method 10 at 40 CFR part 60, appendix A-4 of this chapter. Use a measurement span value of 2 times the concentration of the applicable emission limit.