Code of Federal Regulations Title 40. Protection of Environment 40 CFR Pt. 60, Subpt. EEEE, Tbl. 1 Table 1 to Subpart EEEE of Part 60—Emission Limitations

1. Cadmium

18 micrograms per dry standard cubic meter

3-run average (1 hour minimum sample time per run)

Method 29 of appendix A of this part.

2. Carbon monoxide

40 parts per million by dry volume

3-run average (1 hour minimum sample time per run during performance test), and 12-hour rolling averages measured using CEMS.^b

Method 10, 10A, or 10B of appendix A of this part and CEMS.

3. Dioxins/furans (total basis)

33 nanograms per dry standard cubic meter

3-run average (1 hour minimum sample meter time per run)

Method 23 of appendix A of this part.

4. Hydrogen chloride

15 parts per million by dry volume

3-run average (1 hour minimum sample time per run)

Method 26A of appendix A of this part.

5. Lead

226 micrograms per dry standard cubic meter

3-run average (1 hour minimum sample time per run)

Method 29 of appendix A of this part.

6. Mercury

74 micrograms per dry standard cubic meter

3-run average (1 hour minimum sample time per run)

Method 29 of appendix A of this part.

7. Opacity

10 percent

6-minute average (observe over three 1-hour test runs; i.e., thirty 6-minute averages)

Method 9 of appendix A of this part.

8. Oxides of nitrogen

103 parts per million by dry volume

3-run average (1 hour minimum sample time per run)

Method 7, 7A, 7C, 7D, or 7E of appendix A of this part, or ANSI/ASME PTC 19.10-1981 (IBR, see § 60.17(h)) in lieu of Methods 7 and 7C only.

9. Particulate matter

0.013 grains per dry standard cubic foot

3-run average (1 hour minimum sample time per run)

Method 5 or 29 of appendix A of this part.

10. Sulfur dioxide

3.1 parts per million by dry volume

3-run average (1 hour minimum sample time per run)

Method 6 or 6C of appendix A of this part, or ANSI/ASME PTC 19.10-1981 (IBR, see § 60.17(h)) in lieu of Method 6 only.