Code of Federal Regulations Title 40. Protection of Environment 40 CFR Pt. 60, Subpt. CCCC, Tbl. 7 TABLE 7 TO SUBPART CCCC OF PART 60—EMISSION LIMITATIONS FOR WASTE-BURNING KILNS THAT COMMENCED CONSTRUCTION AFTER JUNE 4, 2010, OR RECONSTRUCTION OR MODIFICATION AFTER AUGUST 7, 2013

Cadmium

0.0014 milligrams per dry standard cubic meter

3-run average (collect a minimum volume of 4 dry standard cubic meters per run)

Performance test (Method 29 at 40 CFR part 60, appendix A-8). Use ICPMS for the analytical finish.

Carbon monoxide

90 (long kilns)/190 (preheater/precalciner) parts per million dry volume

3-run average (1 hour minimum sample time per run)

Performance test (Method 10 at 40 CFR part 60, appendix A-4).

Dioxins/furans (total mass basis)

0.51 nanograms per dry standard cubic meter

3-run average (collect a minimum volume of 4 dry standard cubic meters per run)

Performance test (Method 23 at 40 CFR part 60, appendix A-7).

Dioxins/furans (toxic equivalency basis)

0.075 nanograms per dry standard cubic meter

3-run average (collect a minimum volume of 4 dry standard cubic meters)

Performance test (Method 23 at 40 CFR part 60, appendix A-7).

Hydrogen chloride

3.0 parts per million dry volume

3-run average (1 hour minimum sample time per run) or 30-day rolling average if HCl CEMS is being used

If a wet scrubber or dry scrubber is used, performance test (Method 321 at 40 CFR part 63, appendix A). If a wet scrubber or dry scrubber is not used, HCl CEMS as specified in § 60.2145(j).

Lead

0.014 milligrams per dry standard cubic meter

3-run average (collect a minimum volume of 4 dry standard cubic meters)

Performance test (Method 29 at 40 CFR part 60, appendix A-8). Use ICPMS for the analytical finish.

Mercury

0.0037 milligrams per dry standard cubic meter. Or 21 pounds/million tons of clinker ³

30-day rolling average

Mercury CEMS or integrated sorbent trap monitoring system (performance specification 12A or 12B, respectively, of appendix B and procedure 5 of appendix F of this part), as specified in § 60.2145(j).

Nitrogen oxides

200 parts per million dry volume

30-day rolling average

Nitrogen oxides CEMS (performance specification 2 of appendix B and procedure 1 of appendix F of this part).

Particulate matter (filterable)

4.9 milligrams per dry standard cubic meter

3-run average (collect a minimum volume of 2 dry standard cubic meters)

Performance test (Method 5 or 29 at 40 CFR part 60, appendix A-3 or appendix-8).

Sulfur dioxide

28 parts per million dry volume

30-day rolling average

Sulfur dioxide CEMS (performance specification 2 of appendix B and procedure 1 of appendix F of this part).