Code of Federal Regulations Title 40. Protection of Environment 40 CFR Pt. 60, Subpt. BBBB, Tbl. 8 Table 8 to Subpart BBBB of Part 60—Model Rule—Requirements for Stack Tests

1. Organics

Dioxins/Furans

Method 1

Method 23 ^a

The minimum sampling time must be 4 hours per test run while the municipal waste combustion unit is operating at full load.

2. Metals

Cadmium

Method 1

Method 29 ^a

Compliance testing must be performed while the municipal waste combustion unit is operating at full load.

Lead

Method 1

Method 29 ^a

Compliance testing must be performed while the municipal waste combustion unit is operating at full load.

Mercury

Method 1

Method 29 ^a

Compliance testing must be performed while the municipal waste combustion unit is operating at full load.

Opacity

Method 9

Method 9

Use Method 9 to determine compliance with opacity limits. 3-hour observation period (thirty 6-minute averages).

Particulate Matter

Method 1

Method 5 or 29

The minimum sample volume must be 1.0 cubic meters. The probe and filter holder heating systems in the sample train must be set to provide a gas temperature no greater than 160 ±14 °C. The minimum sampling time is 1 hour.

3. Acid Gases ^b

Hydrogen Chloride

Method 1

Method 26 or 26A ^a

Test runs must be at least 1 hour long while the municipal waste combustion unit is operating at full load.

4. Other ^b

Fugitive Ash

Not applicable

Method 22 (visible emissions)

The three 1-hour observation period must include periods when the facility transfers fugitive ash from the municipal waste combustion unit to the area where the fugitive ash is stored or loaded into containers or trucks.