Code of Federal Regulations Title 33. Navigation and Navigable Waters § 33.105.545 Screening equipment

(1) The owner or operator of a cruise ship terminal may use a metal detection device to screen persons, baggage, and personal effects.

(2) Metal detection devices used at any cruise ship terminal must be operated, calibrated, and maintained in accordance with manufacturer's instructions.

(1) The system meets the standards for cabinet x-ray systems used primarily for the inspection of baggage, found in 21 CFR 1020.40;

(2) Familiarization training for screeners, in accordance with § 105.535, includes training in radiation safety and the efficient use of x-ray systems;

(3) The system must meet the imaging requirements found in 49 CFR 1544.211;

(4) The system must be operated, calibrated, and maintained in accordance with manufacturer's instructions;

(5) The x-ray system must fully comply with any defect notice or modification order issued for that system by the Food and Drug Administration (FDA), unless the FDA has advised that a defect or failure to comply does not create a significant risk of injury, including genetic injury, to any person;

(6) The owner or operator must ensure that a sign is posted in a conspicuous place at the screening location where x-ray systems are used to inspect personal effects and where screeners accept baggage. These signs must—

(1) At locations where x-ray technology is used to inspect baggage or personal effects for explosives, the terminal owner or operator must post signs in accordance with paragraph (b)(6) of this section.

(2) All explosives detection equipment used at a cruise ship terminal must be operated, calibrated, and maintained in accordance with manufacturer's instructions.