Code of Federal Regulations Title 30. Mineral Resources § 30.585.702 What must I include in my Fabrication and Installation Report?

(1) Cover letter

(i) Proposed facility designation, lease, ROW grant, or RUE grant number;

You must submit 1 paper copy and 1 electronic copy.

(ii) Area, name, and block number; and

(iii) The type of facility.

(2) Schedule

Fabrication and installation

You must submit 1 paper copy and 1 electronic copy.

(3) Fabrication information

The industry standards you will use to ensure the facilities are fabricated to the design criteria identified in your Facility Design Report

You must submit 1 paper copy and 1 electronic copy.

(4) Installation process information

Details associated with the deployment activities, equipment, and materials, including onshore and offshore equipment and support, and anchoring and mooring patterns

You must submit 1 paper copy and 1 electronic copy.

(5) Federal, State, and local permits (e.g., EPA, Army Corps of Engineers)

Either 1 copy of the permit or information on the status of the application

You must submit 1 paper copy and 1 electronic copy.

(6) Environmental information

(i) Water discharge;

You must submit 1 paper copy and 1 electronic copy. If you submitted these data as part of your SAP, COP, or GAP, you may reference the plan.

(ii) Waste disposal;

(iii) Vessel information; and

(iv) Onshore waste receiving treatment or disposal facilities.

(7) Project easement

Design of any cables, pipelines, or facilities. Information on burial methods and vessels

You must submit 1 paper copy and 1 electronic copy.