Skip to main content
Find a Lawyer

Code of Federal Regulations Title 24. Housing and Urban Development § 24.3280.903 General requirements for designing the structure to withstand transportation shock and vibration

Current as of January 02, 2025 | Updated by Findlaw Staff

<Text of section effective July 12, 2021, as delayed by 86 FR 13645.>

(a) General. The manufactured home and its transportation system (as defined in § 3280.902(f)) must withstand the effects of highway movement such that the home is capable of being transported safely and installed as a habitable structure. Structural, plumbing, mechanical, and electrical systems must be designed to function after set-up. The home must remain weather protected during the transportation sequence to prevent internal damage.

(b) Testing or analysis requirements. Suitability of the transportation system and home structure to withstand the effects of transportation must be permitted to be determined by testing, or engineering analysis, or a combination of the two as required by paragraphs (b)(1) and (2) of this section.

(1) Road tests. Tests must be witnessed by an independent registered professional engineer or architect, manufacturer's IPIA or DAPIA, or by a recognized testing organization. Such testing procedures must be part of the manufacturer's approved design.

(2) Engineering analysis. Engineering analysis methods based on the principles of mechanics and/or structural engineering may be used to substantiate the adequacy of the transportation system to withstand in-transit loading conditions. As transportation loadings are typically critical in the longitudinal direction, analysis should, in particular, provide emphasis on design of longitudinal structural components of the manufactured home (e.g., main chassis girder beams, sidewalls, and rim joists, etc.). Notwithstanding, all structural elements necessary to the structural integrity of the manufactured home during in-transit loading are also to be evaluated (e.g., transverse chassis members and floor framing members, etc.).

(i)(A) The summation of the design loads in paragraphs (b)(2)(i)(A)(1) through (3) of this section may be used to determine the adequacy of the chassis in conjunction with the manufactured home structure to resist in-transit loading:

(1) Dead load, the vertical load due to the weight of all structural and non-structural components of the manufactured home at the time of shipment.

(2) Floor load, a minimum of 3 pounds per square foot.

(3) Dynamic loading factor, (0.25)[(b2iA) + (b2iB)].

(B) However, the in-transit design loading need not exceed twice the dead load of the manufactured home.

(ii) To determine the adequacy of individual longitudinal structural components to resist the in-transit design loading, a load distribution based on the relative flexural rigidity and shear stiffness of each component may be utilized. For the purpose of loading distribution, the sidewall may be considered to be acting as a “deep beam” in conjunction with other load carrying elements in determining the relative stiffness of the integrated structure. Further, by proper pre-cambering of the chassis assembly, additional loading may be distributed to the chassis, and the remaining loading may be distributed to each of the load carrying members by the relative stiffness principle.

(iii) The analysis is also to include consideration for:

(A) Location of openings in the sidewall during transport and, when appropriate,

provisions for reinforcement of the structure and/or chassis at the opening.

(B) Sidewall component member sizing and joint-splice analysis (i.e., top and bottom plates, etc.), and connections between load carrying elements.

Previous Part of Code Next Part of Code
Back to Chapter List

Cite this article: FindLaw.com - Code of Federal Regulations Title 24. Housing and Urban Development § 24.3280.903 General requirements for designing the structure to withstand transportation shock and vibration - last updated January 02, 2025 | https://codes.findlaw.com/cfr/title-24-housing-and-urban-development/cfr-sect-24-3280-903/

FindLaw Codes may not reflect the most recent version of the law in your jurisdiction. Please verify the status of the code you are researching with the state legislature before relying on it for your legal needs.

Was this helpful?

Welcome to FindLaw's Cases & Codes

A free source of state and federal court opinions, state laws, and the United States Code. For more information about the legal concepts addressed by these cases and statutes, visit FindLaw’s Learn About the Law.

Go to Learn About the Law

Latest Blog Posts

For Legal Professionals

Learn About The Law

Get help with your legal needs

FindLaw’s Learn About the Law features thousands of informational articles to help you understand your options. And if you’re ready to hire an attorney, find one in your area who can help.

Go to Learn About the Law

Need to Find an Attorney?

Search our directory by legal issue

Enter information in one or both fields (Required)

Copied to clipboard