Learn About The Law
Get help with your legal needs
FindLaw’s Learn About the Law features thousands of informational articles to help you understand your options. And if you’re ready to hire an attorney, find one in your area who can help.
Code of Federal Regulations Title 10. Energy § 10.429.28 Faucets
Current as of January 02, 2025 | Updated by Findlaw Staff
(a) Sampling plan for selection of units for testing.
(1) The requirements of § 429.11 are applicable to faucets; and
(2) For each basic model of faucet, a sample of sufficient size shall be randomly selected and tested to ensure that any represented value of water consumption of a basic model for which consumers favor lower values shall be no less than the higher of the higher of:
(i) The mean of the sample, where:
Or,
(ii) The upper 95 percent confidence limit (UCL) of the true mean divided by 1.05, where:
(b) Certification reports.
(1) The requirements of § 429.12 are applicable to faucets; and
(2) Pursuant to § 429.12(b)(13), a certification report shall include the following public product-specific information: For non-metering faucets, the maximum water use in gallons per minute (gpm) rounded to the nearest 0.1 gallon; for metering faucets, the maximum water use in gallons per cycle (gal/cycle) rounded to the nearest 0.01 gallon; and for all faucet types, the flow water pressure in pounds per square inch (psi).
Cite this article: FindLaw.com - Code of Federal Regulations Title 10. Energy § 10.429.28 Faucets - last updated January 02, 2025 | https://codes.findlaw.com/cfr/title-10-energy/cfr-sect-10-429-28/
FindLaw Codes may not reflect the most recent version of the law in your jurisdiction. Please verify the status of the code you are researching with the state legislature before relying on it for your legal needs.
Was this helpful?
