Welcome to FindLaw's Cases & Codes, a free source of state and federal court opinions, state laws, and the United States Code. For more information about the legal concepts addressed by these cases and statutes, visit FindLaw's Learn About the Law.
(a) For purposes of this section, “resizing” means minimal cutting, breaking, or sawing, but does not include planing, grinding, drilling, chipping, sanding, shredding, mulching, or other mechanical handling or any other treatment.
(b) Except as provided in subdivisions (c) and (d), treatment, as defined in Section 25123.5, of treated wood waste managed in accordance with the alternative management standards of this article is prohibited.
(c) Resizing is exempt from the permitting requirements of this chapter when resized to facilitate transport or reuse and the following requirements are met:
(1) The treated wood waste is handled in a manner that prevents the uncontrolled release of hazardous constituents to the environment.
(2) If size reduction of the treated wood waste results in sawdust, particles, or other material smaller than one cubic inch, the material is captured and managed as treated wood waste.
(d) Sorting and segregating are both exempt from the hazardous waste permitting requirements of this chapter. The treated wood waste shall be handled in a manner that prevents the uncontrolled release of hazardous constituents to the environment.
(e) An employer resizing, sorting, or segregating treated wood waste shall comply with the employee training requirements of Section 25230.12 for all applicable employees.
Cite this article: FindLaw.com - California Code, Health and Safety Code - HSC § 25230.10 - last updated January 01, 2019 | https://codes.findlaw.com/ca/health-and-safety-code/hsc-sect-25230-10/
FindLaw Codes may not reflect the most recent version of the law in your jurisdiction. Please verify the status of the code you are researching with the state legislature or via Westlaw before relying on it for your legal needs.