Maine Revised Statutes Title 29-A. Motor Vehicles § 2365. Four-axle single unit truck in combination with 2-axle trailer
Current as of January 01, 2022 | Updated by FindLaw Staff
Welcome to FindLaw's Cases & Codes, a free source of state and federal court opinions, state laws, and the United States Code. For more information about the legal concepts addressed by these cases and statutes, visit FindLaw's Learn About the Law.
A combination vehicle consisting of a 4-axle single unit truck operating in combination with a 2-axle trailer may be operated, or caused to be operated, with a maximum gross weight of 94,000 pounds if:
1. Registration. The trailer unit is registered for a minimum of 28,000 pounds gross weight and the combined registered weight of the truck and trailer unit is at least 94,000 pounds gross weight or the truck is registered for at least 94,000 pounds;
2. Repealed. Laws 1999, c. 580, § 11, eff. April 1, 2001.
3. Single axle weights. The following single axle weights are not exceeded:
A. For a steering axle, the limit is the lesser of 14,000 pounds or the weight limit provided by this chapter;
B. For 2 to 4 truck axles, the limit is 20,000 pounds for each axle; or
C. For trailer axles, the limit is 18,000 pounds for each axle;
4. Tri-axle gross weight. The gross weight of the tri-axle, which is the sum of the weight of the 2nd, 3rd and 4th axles of the truck, does not exceed 50,000 pounds;
5. Liftable axles. When operating at a gross vehicle weight exceeding 88,000 pounds, all liftable axles of the vehicle are in full contact with the ground at all times;
6. Percent over basic weight. The “percent over basic weight” used to calculate fines for weight violations by the vehicle are based upon a gross vehicle weight limit of 85,000 pounds or upon the axle weight limits enumerated in subsections 3 and 4, as appropriate;
7. Vehicle dimensions. The following vehicle dimensions are met:
At Least
|
Not to Exceed
|
|
---|---|---|
Overall Vehicle Length |
--
|
65 ft. 0 in. |
Axle 1 to Axle 6 |
56 ft. 10 in. |
58 ft. 10 in. |
Axle 1 to Axle 2 |
13 ft. 6 in. |
18 ft. 4 in. |
Axle 2 to Axle 3 |
3 ft. 8 in. |
5 ft. 0 in. |
Axle 3 to Axle 4 |
3 ft. 8 in. |
5 ft. 0 in. |
Axle 4 to Axle 5 |
12 ft. 11 in. |
17 ft. 6 in. |
Axle 5 to Axle 6 |
15 ft. 2 in. |
20 ft. 7 in. |
Axle distances are measured from axle center to axle center; and
8. Repealed. Laws 1999, c. 580, § 12, eff. April 1, 2001.
Nothing contained in this section is applicable to vehicles operating on the Interstate Highway System, as defined in the Federal Aid Highway Act of 1956. 1
Cite this article: FindLaw.com - Maine Revised Statutes Title 29-A. Motor Vehicles § 2365. Four-axle single unit truck in combination with 2-axle trailer - last updated January 01, 2022 | https://codes.findlaw.com/me/title-29-a-motor-vehicles/me-rev-st-tit-29-a-sect-2365.html
FindLaw Codes may not reflect the most recent version of the law in your jurisdiction. Please verify the status of the code you are researching with the state legislature or via Westlaw before relying on it for your legal needs.
Was this helpful?