Kansas Statutes Chapter 8. Automobiles and Other Vehicles § 8-1749. Safety belts and shoulder harnesses
Current as of January 01, 2020 | Updated by FindLaw Staff
Welcome to FindLaw's Cases & Codes, a free source of state and federal court opinions, state laws, and the United States Code. For more information about the legal concepts addressed by these cases and statutes, visit FindLaw's Learn About the Law.
(a) Every passenger car manufactured or assembled after January 1, 1965, shall be equipped with at least two (2) lap-type safety belt assemblies for use in the front seating positions.
(b) Every passenger car manufactured or assembled after January 1, 1968, shall be equipped with a lap-type safety belt assembly for each permanent passenger seating position. This requirement shall not apply to police vehicles.
(c) Every passenger car manufactured or assembled after January 1, 1968, shall be equipped with at least two (2) shoulder harness-type safety belt assemblies for use in the front seating positions.
(d) The secretary of transportation shall except specified types of motor vehicles or seating positions within any motor vehicle from the requirements imposed by subsections (a) to (c) when compliance would be impractical.
(e) No person shall distribute, have for sale, offer for sale or sell any safety belt or shoulder harness for use in motor vehicles unless it meets current minimum standards and specifications approved by the secretary of transportation.
Cite this article: FindLaw.com - Kansas Statutes Chapter 8. Automobiles and Other Vehicles § 8-1749. Safety belts and shoulder harnesses - last updated January 01, 2020 | https://codes.findlaw.com/ks/chapter-8-automobiles-and-other-vehicles/ks-st-sect-8-1749.html
FindLaw Codes may not reflect the most recent version of the law in your jurisdiction. Please verify the status of the code you are researching with the state legislature or via Westlaw before relying on it for your legal needs.
Was this helpful?