Current as of October 03, 2022 | Updated by FindLaw Staff
Welcome to FindLaw's Cases & Codes, a free source of state and federal court opinions, state laws, and the United States Code. For more information about the legal concepts addressed by these cases and statutes, visit FindLaw's Learn About the Law.
(a) In your remedial plan, describe all of the following:
(1) The class or category of engines/equipment to be recalled, including the number of engines/equipment involved and the model year or other information needed to identify the engines/equipment.
(2) The modifications, alterations, repairs, corrections, adjustments, or other changes you will make to correct the affected engines/equipment.
(3) A brief description of the studies, tests, and data that support the effectiveness of the remedy you propose to use.
(4) The instructions you will send to those who will repair the engines/equipment under the remedial plan.
(5) How you will determine the owners' names and addresses.
(6) How you will notify owners; include a copy of any notification letters.
(7) The proper maintenance or use you will specify, if any, as a condition to be eligible for repair under the remedial plan. Describe how these specifications meet the provisions of paragraph (e) of this section. Describe how the owners should show they meet your conditions.
(8) The steps owners must take for you to do the repair. You may set a date or a range of dates, specify the amount of time you need, and designate certain facilities to do the repairs.
(9) Which company (or group) you will assign to do or manage the repairs.
(10) If your employees or authorized warranty agents will not be doing the work, state who will and describe their qualifications.
(11) How you will ensure an adequate and timely supply of parts.
(12) The effect of proposed changes on fuel consumption, driveability, and safety of the engines/equipment you will recall; include a brief summary of the information supporting these conclusions.
(13) How you intend to label the engines/equipment you repair and where you will place the label on the engine/equipment (see § 1068.515).
(b) We may require you to add information if it is needed to evaluate your remedial plan.
(c) We may require you to test the proposed repair to show it will remedy the noncompliance.
(d) Use all reasonable means to locate owners. We may require you to use government or commercial registration lists to get owners' names and addresses so your notice will be effective.
(e) The maintenance or use that you specify as a condition for eligibility under the remedial plan may include only things you can show would cause noncompliance. Do not require use of a component or service identified by brand, trade, or corporate name unless we approved this approach with your original certificate of conformity. Also, do not place conditions on who maintained the engine/equipment.
(f) We may require you to adjust your repair plan if we determine owners would be without their engines or equipment for an unreasonably long time.
(g) We will tell you in writing within 15 days of receiving your remedial plan whether we have approved or disapproved it. We will explain our reasons for any disapproval.
(h) Begin notifying owners within 15 days after we approve your remedial plan. If we hold a hearing, but do not change our position about the noncompliance, you must begin notifying owners within 60 days after we complete the hearing unless we specify a later deadline.
§ 10-95. Number of hooks; untagged devices. Any individual possessing a valid sport fishing license may take aquatic life by hand, or may use pole and line, bank pole and line, throw line, trotline, buoyed ganging devices, or other legal devices not exceeding 50 hooks in the aggregate, however, any individual at any one time is allowed to use under his or her immediate control only 2 untagged sport fishing devices and any additional devices up to the aggregate of 50 hooks must be tagged with his or her name and mailing address. It shall be unlawful to sell or barter any aquatic life or parts thereof taken by sport fishing devices.
A dip net for non-commercial smelt fishing in Lake Michigan may be used subject to the provisions of Section 10-40.
Any sport fishing device, including trot line device, bank pole, and throw line or buoyed ganging devices, left unattended must be tagged with the name and mailing address of the operator. All required tags shall be in a position to be at all times exposed to public view.
A sport fishing license permits the holder to seine for minnows, provided that minnows are not sold. The seine shall not be longer than 20 feet, deeper than 6 feet, or contain mesh larger than 1/2 inch bar measurement.
Cite this article: FindLaw.com - Code of Federal Regulations Title 40. Protection of Environment § 40.1068.510 How do I prepare and apply my remedial plan? - last updated October 03, 2022 | https://codes.findlaw.com/cfr/title-40-protection-of-environment/cfr-sect-40-1068-510.html
FindLaw Codes may not reflect the most recent version of the law in your jurisdiction. Please verify the status of the code you are researching with the state legislature or via Westlaw before relying on it for your legal needs.
Was this helpful?