Current as of October 03, 2022 | Updated by FindLaw Staff
Welcome to FindLaw's Cases & Codes, a free source of state and federal court opinions, state laws, and the United States Code. For more information about the legal concepts addressed by these cases and statutes, visit FindLaw's Learn About the Law.
(a) A licensee may perform well logging with a sealed source only after the licensee has a written agreement with the employing well owner or operator. This written agreement must identify who will meet the following requirements:
(1) If a sealed source becomes lodged in the well, a reasonable effort will be made to recover it.
(2) A person may not attempt to recover a sealed source in a manner which, in the licensee's opinion, could result in its rupture.
(3) The radiation monitoring required in § 39.69(a) will be performed.
(4) If the environment, any equipment, or personnel are contaminated with licensed material, they must be decontaminated before release from the site or release for unrestricted use; and
(5) If the sealed source is classified as irretrievable after reasonable efforts at recovery have been expended, the following requirements must be implemented within 30 days:
(i) Each irretrievable well logging source must be immobilized and sealed in place with a cement plug.
(ii) A means to prevent inadvertent intrusion on the source, unless the source is not accessible to any subsequent drilling operations; and
(iii) A permanent identification plaque, constructed of long lasting material such as stainless steel, brass, bronze, or monel, must be mounted at the surface of the well, unless the mounting of the plaque is not practical. The size of the plaque must be at least 17 cm [7 inches] square and 3 mm [ 1/8 –inch] thick. The plaque must contain—
(A) The word “CAUTION”;
(B) The radiation symbol (the color requirement in § 20.1901(a) need not be met);
(C) The date the source was abandoned;
(D) The name of the well owner or well operator, as appropriate;
(E) The well name and well identification number(s) or other designation;
(F) An identification of the sealed source(s) by radionuclide and quantity;
(G) The depth of the source and depth to the top of the plug; and
(H) An appropriate warning, such as, “DO NOT RE–ENTER THIS WELL.”
(b) The licensee shall retain a copy of the written agreement for 3 years after the completion of the well logging operation.
(c) A licensee may apply, pursuant to § 39.91, for Commission approval, on a case-by-case basis, of proposed procedures to abandon an irretrievable well logging source in a manner not otherwise authorized in paragraph (a)(5) of this section.
(d) A written agreement between the licensee and the well owner or operator is not required if the licensee and the well owner or operator are part of the same corporate structure or otherwise similarly affiliated. However, the licensee shall still otherwise meet the requirements in paragraphs (a)(1) through (a)(5).
Cite this article: FindLaw.com - Code of Federal Regulations Title 10. Energy § 10.39.15 Agreement with well owner or operator - last updated October 03, 2022 | https://codes.findlaw.com/cfr/title-10-energy/cfr-sect-10-39-15.html
FindLaw Codes may not reflect the most recent version of the law in your jurisdiction. Please verify the status of the code you are researching with the state legislature or via Westlaw before relying on it for your legal needs.
Was this helpful?